Dental Implants Fatigue Tester
Standard
- ISO 14801:2016: Specifies dynamic fatigue testing protocols for endosseous dental implants, including load ratios, frequency, and failure criteria.
- YY/T 0521-2018 (China): Defines methodologies for evaluating the fatigue strength of dental implant-abutment complexes under cyclic loading.
Product Advantages
- Electromagnetic Precision: Novel servo motor technology ensures backlash-free operation with 0.001 mm displacement resolution.
- Biorelevant Simulation: Integrated 37°C water bath system replicates physiological conditions for in vitro corrosion testing.
- Universal Fixturing: Adjustable angle clamps accommodate straight/angulated implants (0°–25° pre-set options).
- High-Frequency Stability: 20 Hz operation with ±0.05% load accuracy across 2 million cycle tests.
- Compact Design: Benchtop footprint (450 × 400 × 600 mm) suits laboratory environments.
- Regulatory Compliance: Pre-loaded ISO 14801 protocols with automated data reporting for FDA/CE submissions.
Product Features
- Electromagnetic Servo Actuator: 600 N dynamic load capacity with programmable R=0.1–10 ratios.
- Dual Sensor System: 0.01 N resolution load cell + 0.001 mm LVDT displacement transducer.
- Dynamic Load Control: 0.1–20 Hz frequency range with sine/square/random waveforms.
- Thermal-Mechanical Bath: 37±0.5°C recirculating water system with anti-evaporation design.
- High-Resolution Imaging: Built-in 2MP camera system for fretting corrosion analysis.
- Safety Suite: Emergency stop, overload clutches, and water leak detection system.
Technical Parameters
| Parameter | Specification |
|---|---|
| Max. Dynamic Load | ±600 N (0.01 N resolution) |
| Frequency Range | 0.1–20 Hz (0.01 Hz increments) |
| Load Ratio (R) | 0.1–10 (adjustable) |
| Displacement Range | ±5 mm (0.001 mm resolution) |
| Water Bath Temperature | 37±0.5°C (PT1000 sensor) |
| Data Sampling Rate | 10 kHz (synchronized across 8 channels) |
| Power Requirements | 220V/110V ±10%, 50/60Hz, 1,200W |
| Dimensions (W×D×H) | 450 × 400 × 600 mm |
| Weight | 55 kg (net) / 65 kg (with water bath) |
| Noise Level | <55 dB (A-weighted) |
Accessories
- Dental Implant Fixture Kit:
- Adjustable angle clamps (0°–25° pre-set options)
- Self-centering abutment adapters (3.0–6.5 mm compatibility)
- Thermal-Mechanical Bath:
- 10L capacity with recirculating pump
- Corrosion-resistant titanium interior
- FatigueMaster Pro Software:
- Automated S-N curve generation and fatigue limit calculation
- 21 CFR Part 11-compliant audit trail with blockchain timestamping
- Remote monitoring via iOS/Android app
- Operator Kit:
- Calibrated torque wrench set (0.1–10 Nm)
- Implant alignment jigs (ISO 14801 compliant)
- Calibration Bundle:
- NIST-traceable force calibration weights
- LVDT verification tool
- Safety Kit:
- Water leak detection system
- Acoustic enclosure with 25 dB noise reduction
Send product request
Other supplier products
 |
Foam Indentation Fatigue Testing Machine | Purpose: This machine is used to measure the indentation hardness of porous elastic materials. The polyurethane foam sample can be tested accordin... |
 |
Face Mask Tensile Testing Machine | Standards: ISO13934-1,13934-2,13935-1,13935-2,13936-1,13936-2,13936-3,13937-2,13937-3,13937-4,1421, 2411, 2062, 4674-1,5082, 9073.3, 9073.4, 907... |
 |
Laminoplasty Plate System Fatigue Testing Machine | Standard ASTM F2193-18: Specifies static/fatigue testing protocols for spinal constructs, including lamina fixation plates. ISO 12189-1: Define... |
 |
Vertical Flammability Test Chamber ASTM D6413 CALIF TB117 | Standards: ASTM D6413. CALIF TB117. DOC-FF 3/71. 16CFR Parts1615/1616. FTMS 191-5903. CPAI 84 Applications: The Vertical Flammability Test Chamb... |
 |
MK2 fiber impurity analyzer ITMF | Standards: ITMF Applications: It is mainly used to determine the content of non-fibrous components in synthetic fibers and 100 grams of debris, ... |
Same products
 |
Full-Body Garment Stress Tester,FZ/T 70015 | Seller: Standard International Group (HK) Limited | TheFull-Body Garment Stress Testeris a precision instrument designed to quantify the pressure exe... |
 |
Industrial Dry Cleaning Machine,industrial garment steamer | Seller: Standard International Group (HK) Limited | TheIndustrial Dry Cleaning and Energy-Saving Dryer Machinesare designed for high-performance, rel... |
 |
MST Medical Compression Stocking Tester,compression sock tester | Seller: Standard International Group (HK) Limited | The MST Medical Compression Stocking Tester is a professional instrument designed to evaluate the... |
 |
MMT Liquid Water Separation Tester,MMT Liquid Water Analysis Tool | Seller: Standard International Group (HK) Limited | Applications Textile Manufacturing:Testing waterproof fabrics for outdoor gear R&D:Developi... |
 |
Dental material color stability tester | Seller: Standard International Group (HK) Limited | Application The applications of color stability testers for dental materials are mainly reflecte... |
