Plastic Friction and Wear Tester
Product Description:
Plastic sliding friction wear tester consists of two main parts: the host machine and intelligent control system, which can be operated through the control system, and can display the value, torque, and time during the test process, display the current test value, and print out the test report of the standard requirements.
This equipment is equipped with a water bath box, so that the specimen is completely in the water for friction and wear test, widely used in ships, warships, submarines, propellers, high polymer water lubrication bearing material friction and wear test, all-round simulation of the specimen materials and products in the actual use of the process of working conditions. Make the experimental process and data more real and reliable.
Standard:
GB3960-2016
Features:
1, motor: the use of high-precision speed motor, accurate control of the speed of the mechanism, to meet the requirements of experimental accuracy.
2, transmission system: the use of high-precision synchronous belt transmission, transmission efficiency of more than 98%, to ensure that the number of revolutions and torque on each friction ring is exactly the same, to further enhance the experimental accuracy of the product.
3、M-200B water bath box: the end face is made of acrylic material, the appearance is clean, beautiful and atmospheric. In the experimental process the experimenter can observe the specimen in the water to do the experiment scene, so that the whole process of the experiment as far as the eye can see. And when we need to not do experiments in the water when you can pull out the water bath box at the lower end of the sealing cover, let go of the water, which is the water bath box can also be used as a receiving box, to prevent experiments when the friction off the powder affects the environment of the equipment and test bench. Water bath box metal frame using SUS316/SUS316L stainless steel material to do the frame, so that the water bath box solid, reliable, durable and other advantages.
4、Sensor: The sensor accuracy of this instrument can reach 1% FS,
5、Lever system: The lever system in this equipment, using Archimedes' law of leverage formula for the design, in the processing of weights and levers of the density and size of a rigorous calculation, to ensure that the friction ring right above the force value is accurate.
6, end sealing system: this sealing system adopts fixed ring and moving ring sealing, fixed ring and moving ring sealing surface roughness is as high as 0.2. Through the spring on the moving ring on the fixed ring to achieve the sealing effect of the axial force, when the rotation speed is as high as 3,000r/min, there will be no leakage, fully meet the needs of the equipment.
Technical Parameters：
|
Sample size under test |
30*7*6 (mm) |
|
Rotation speed |
200 rpm |
|
Load |
20KG (196N) ±1% |
|
Friction ring size |
φ40×10mm , chamfer 0.5×45°, deviation of concentricity between outer surface and inner circle is less than 0.01 |
|
Friction torque |
0--4N-m |
|
Friction ring material |
Quenched 45-gauge steel, heat-treated HRC40-45, surface finish of outer circle |
|
Velocity accuracy |
1% |
|
Friction torque accuracy |
1% |
|
Sensor measurement accuracy |
1% FS |
|
Load accuracy |
0.5% |
|
Counter accuracy |
1S |
|
Control method |
microcomputer control |
|
Instrument size (mm) Instrument weight (kg) |
600*400*600 |
|
Sample size under test |
80 |
Send product request
Other supplier products
 |
Filter Dynamic Cycling Tester | Filter element dynamic cycling test bench is mainly used to test the chemical element precipitation characteristics of filter element under long-te... |
 |
KES - SE Friction Sensation Tester | Content TheFriction Tester analyzes hand movements-particularly, strokes-performed by artisans and professionals when judging a fabric’s tex... |
 |
Fat End Type of Thread EndSuction Machine | lt is applicable to clean up large-sizegarment, such as: surgical gown, robeetc.,thread end and fibre dust cutdown from carpet and rugs (no statice... |
 |
Rupture strength tester | Standard IEC 61730-2: Photovoltaic (PV) Module Safety Qualification – Requirements for Testing UL 61730: Safety Standard for Photovoltaic... |
 |
Catheter Leakage and Compliance Tester | Catheter Residual Vacuum Tester - Other test instrument - standard Main Uses of the Catheter Leakage and Compliance Tester The catheter leakage a... |
Same products
 |
Large Naïve VHH Library | Seller: AlpVHHs | Large Naïve VHH Library VHHare single-domain antibodies derived from the variable regions o... |
 |
pH-2398 pH/EC/ORP/Temperature multi-parameter Water Quality Tester | Seller: Kelilong Electron Co.,Ltd | Feature Large display screen, capable of simultaneously measuring water quality pH, redox potent... |
 |
ORP-2026S Waterproof Soil ORP and Temperature Meter | Seller: Kelilong Electron Co.,Ltd | 范围 ORP -999～999mV Temp 0～50℃ 分辨率 ORP 1mV... |
 |
TDS-2616 Waterproof EC/TDS/Temperature Meter | Seller: Kelilong Electron Co.,Ltd | Range EC ～19.9mS TDS Temp 0～50℃ R... |
 |
EC-98330 CF ECOstick - Nutrient Tester | Seller: Kelilong Electron Co.,Ltd | Ideal for hydroponics and agriculture applications, theNutrient Tester accurately measures the el... |
