Hydraulic Oil Filtration and Dewatering Tester

Applications:

Hydraulic and lubrication system oil purification and filtration;

Hydraulic and lubrication system oil degassing;

Hydraulic and lubrication system oil demulsification;

Hydraulic and lubrication system oil dewatering.

Technical parameters:

1. Rated flow rate L/min: 40. 100. 150

2. Rated pressure MPa: 0.6

3. Original pressure loss MPa: ≤0.2

4. Coarse filtration precision μm: 100

5.Primary filtration precision μm: 25. 40

6. Secondary filtration precision μm: 3. 5. 10

7. Motor power Kw: 1.1+0.75. 2.2+1.1. 4+1.1

8.Voltage V: 380

9. Weight Kg: 380. 480. 680

10. External dimensions mmLXBXH: 1500×800×1700. 1800×1000×1800. 2200×1100×180

Technical features:

1. the oil filter includes two motor-driven special gear pumps, with low noise, self-absorption capacity, smooth operation and other characteristics;

2. high-pressure pipeline is equipped with an overflow protection device, which can effectively protect the hydraulic system's Safety;

3. the use of thermal relay protection to prevent motor damage caused by motor overload;

4. suction port coarse filter to protect the oil pump and extend the service life of the fine filter;. 5. the pump is equipped with a two-stage fine filter after the pump to protect the oil pump.

5. Two-stage fine filter is provided after the pump, so that the oil can quickly reach high cleanliness and achieve the required result;

6. The fine filter can be selected with different precision according to the different needs of users to achieve the required result;

7. The panel is equipped with a pressure gauge, which continuously indicates the operating status of the system and the degree of contamination of the filter element during the working time;

8. The adoption of a separate heating system can effectively solve the impact on the life of the filter element in case of a low ambient temperature. The influence on the life of the filter element is effectively solved in the case of low ambient temperature.

Other supplier products

	Helmets Vertical SpacingInfrared - positioning Tester	Purpose This measuring instrument is used to measure the vertical spacing and wearing height of safety helmets. Applicable Standard GB/T 2812-...
	Flooring Materials Abrasion Resistance Tester	Standard ASTM D3884(Abrasion Resistance of Textile Fabrics) ISO 5470-1(Rubber or Plastics-Coated Fabrics - Abrasion Resistance) EN 660-2(Abras...
	PV Backsheet Abrasion Tester/Coating scratch tester for solar panels/ Solar panel backsheet scratch hardness tester	Standard IEC 61730-2: Photovoltaic (PV) Module Safety Qualification – Requirements for Testing UL 1703: Flat-Plate Photovoltaic Modules a...
	Textile Point-to-Point Resistivity Tester	It is an essential instrument for the "Special Labor Protective Equipment Safety Certification" (LA Certification) and the "Special Labor Protectiv...
	Large diameter blasting test machine	Standard ASTM D1599: Compliant for short-time hydraulic failure testing of thermoplastic pipes under linear pressure ramp. ISO 1167: Configurable...

All supplier products

Same products

	Air Permeability Tester STD- F8	Seller: Standard International Group (HK) Limited	The Air Permeability Tester is designed to quickly and accurately measure the breathability and p...
	Surface Performance Tester STD-FB4 - A	Seller: Standard International Group (HK) Limited	Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti...
	Compression Tester STD - FB3 - A	Seller: Standard International Group (HK) Limited	TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar...
	Single - Strand Bending Tester STD - FB2 - SH	Seller: Standard International Group (HK) Limited	Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ...
	Bending Tester STD- FB2 - S	Seller: Standard International Group (HK) Limited	Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig...