Petroleum Products Kinematic Viscosity Tester
Meet the standard:
ASTM D445
ISO 3104
IP 71
Product Introduction:
The determination of kinematic viscosity is performed by measuring the time it takes for a defined volume of a liquid to flow through a calibrated glass capillary viscometer under gravity at a precisely controlled constant temperature. The kinematic viscosity is then calculated by multiplying the measured flow time by the calibration constant of the viscometer.
A typical Petroleum Products Kinematic Viscosity Tester consists of a highly stable temperature-controlled bath (usually a liquid bath like glass filled with a transparent fluid) capable of maintaining the test temperature with high accuracy and uniformity. Capillary viscometers are mounted vertically in holders within this bath. Once the sample reaches the test temperature, it is drawn into the viscometer bulb, and the time it takes to flow between two designated marks is measured.
Automated versions of these testers can handle multiple samples simultaneously, automatically fill the viscometer, detect the fluid menisci using optical or thermal sensors to measure flow time, clean and dry the viscometer, and calculate and report the results. The accuracy of the temperature control and the flow time measurement are critical for obtaining reliable kinematic viscosity values, as viscosity is highly dependent on temperature. Different types and sizes of calibrated capillary viscometers are used to cover a wide range of viscosity values.
The instrument is used for:
Determining the kinematic viscosity of fuels, lubricants, hydraulic fluids, and other petroleum-based products.
Quality control to ensure products meet specified viscosity grades (e.g., SAE grades for engine oils, ISO VG grades for industrial oils).
Research and development of new petroleum products and formulations.
Monitoring the condition of in-service oils (e.g., detecting fuel dilution or oxidation).
Characterizing the flow behavior of petroleum fluids at specific temperatures.
Product Advantages:
Provides accurate and reliable measurement of kinematic viscosity according to international standards.
Essential for quality control, product specification, and trade of petroleum products.
Helps predict how petroleum fluids will flow and perform in various temperature conditions.
Covers a wide range of viscosity values by using different calibrated capillary viscometers.
Temperature-controlled bath ensures tests are performed under precise and repeatable thermal conditions.
Automated versions increase throughput, improve accuracy, and reduce operator involvement.
Widely accepted and standardized test method.
Send product request
Other supplier products
 |
Fabric Bursting Strength Tester | Standards: ASTM 3786-06、ISO 2758、ISO 13938-2、BS 3424 BS 3137、BS 4768、AS 2001.2.4、GB/T 7742 IWSTM 29、EDA NA 80.4-02、EDA NA 80.3-99、BS 2922 FZ/T 6... |
 |
Shoe Sole Bending Tester | Applications： TheFootwear Flection Testeris designed to assess the flexing endurance of overall footwear in wet and dry conditions. Product i... |
 |
Absorbable Bone - connecting Plates Four - point Bending Tester | Standard ASTM F2119: Standard test method for constant load testing of bioabsorbable screws and washers, applicable to bending performance evalu... |
 |
Mask flame retardant tester EN 149 YY 0469 | Standards: GB 19083-2010. EN 149. GB 2626. YY 0469 Applications: Mask Flame Retardant Tester is a special test instrument for flame retardant pe... |
 |
Hexapod Tumbler test machine | Introduction The steel ball or the hexagonal feet randomly roll in the rotating drum, which is covered with carpet textile samples. Observe the ap... |
Same products
 |
KL‑016A Benchtop High‑precision pH Meter | Seller: Kelilong Electron Co.Ltd | Product Description: Large‑screen display with high resolution and precision for con... |
 |
Large Naïve VHH Library | Seller: AlpVHHs | Large Naïve VHH Library VHHare single-domain antibodies derived from the variable regions o... |
 |
pH-2398 pH/EC/ORP/Temperature multi-parameter Water Quality Tester | Seller: Kelilong Electron Co.,Ltd | Feature Large display screen, capable of simultaneously measuring water quality pH, redox potent... |
 |
ORP-2026S Waterproof Soil ORP and Temperature Meter | Seller: Kelilong Electron Co.,Ltd | 范围 ORP -999～999mV Temp 0～50℃ 分辨率 ORP 1mV... |
 |
TDS-2616 Waterproof EC/TDS/Temperature Meter | Seller: Kelilong Electron Co.,Ltd | Range EC ～19.9mS TDS Temp 0～50℃ R... |
