Petroleum Products Kinematic Viscosity Tester
Meet the standard:
ASTM D445
ISO 3104
IP 71
Product Introduction:
The determination of kinematic viscosity is performed by measuring the time it takes for a defined volume of a liquid to flow through a calibrated glass capillary viscometer under gravity at a precisely controlled constant temperature. The kinematic viscosity is then calculated by multiplying the measured flow time by the calibration constant of the viscometer.
A typical Petroleum Products Kinematic Viscosity Tester consists of a highly stable temperature-controlled bath (usually a liquid bath like glass filled with a transparent fluid) capable of maintaining the test temperature with high accuracy and uniformity. Capillary viscometers are mounted vertically in holders within this bath. Once the sample reaches the test temperature, it is drawn into the viscometer bulb, and the time it takes to flow between two designated marks is measured.
Automated versions of these testers can handle multiple samples simultaneously, automatically fill the viscometer, detect the fluid menisci using optical or thermal sensors to measure flow time, clean and dry the viscometer, and calculate and report the results. The accuracy of the temperature control and the flow time measurement are critical for obtaining reliable kinematic viscosity values, as viscosity is highly dependent on temperature. Different types and sizes of calibrated capillary viscometers are used to cover a wide range of viscosity values.
The instrument is used for:
Determining the kinematic viscosity of fuels, lubricants, hydraulic fluids, and other petroleum-based products.
Quality control to ensure products meet specified viscosity grades (e.g., SAE grades for engine oils, ISO VG grades for industrial oils).
Research and development of new petroleum products and formulations.
Monitoring the condition of in-service oils (e.g., detecting fuel dilution or oxidation).
Characterizing the flow behavior of petroleum fluids at specific temperatures.
Product Advantages:
Provides accurate and reliable measurement of kinematic viscosity according to international standards.
Essential for quality control, product specification, and trade of petroleum products.
Helps predict how petroleum fluids will flow and perform in various temperature conditions.
Covers a wide range of viscosity values by using different calibrated capillary viscometers.
Temperature-controlled bath ensures tests are performed under precise and repeatable thermal conditions.
Automated versions increase throughput, improve accuracy, and reduce operator involvement.
Widely accepted and standardized test method.
在线联系供应商
Other supplier products
 |
5kN Universal Testing Machine | Standards: 1. Test machine host 1 set, 2. 1 set of test control software, 3. 1 set of data acquisition card, 4. Stepper motor 1 set, 5. Decelera... |
 |
Battery diaphragm permeability tester | Meet the standard: GB/T458, ISO536/2, QB/T1667, GB/T23227, ISO2965, YC/T172, GB/T12655, S05636/3, IS05636/5, GB/T20042.7-2014, GB/T36363-2018, ... |
 |
Bone Screw Static Torque Testing Machine | Standard YY/T 0591-2011: Chinese standard specifying torsion testing methods for intramedullary nails, including torque application, angular dis... |
 |
Shoe Sole Bending Tester | Product information： The Footwear Flection Tester is supplied in both single or twin station models and the operation simulates the flexing of foo... |
 |
Suture Needle Sharpness Intensity Tester | Suture Needle Sharpness Intensity Tester - Other test instrument - standard Product Information: The Sharpness and Strength Tester for Suture Nee... |
Same products
 |
PH-2398 pH/EC/ORP/温度 多参数测试仪 | 卖方: 科立龙电子股份有限公司 | 大显示，可同时进行水质PH、氧化还原电位、电导率、温度的测量； 带背光LCD显示清晰，功能齐全，精度高； 仪表采用微电脑测量与控制技术，具有自动校准功能，方便实用。 内置蓝牙，可以与电脑或... |
 |
ORP-2026S 防水型 土壤ORP&温度 二合一测试仪 | 卖方: 科立龙电子股份有限公司 | 范围 ORP -999～999mV Temp 0～50℃ 分辨率 ORP 1mV... |
 |
防水型 EC /TDS/温度三合一参数测试仪 | 卖方: 科立龙电子股份有限公司 | 范围 EC ～19.9mS TDS Temp 0～50℃ 分辨率 ... |
 |
EC-98330 电导率营养测试棒 | 卖方: 科立龙电子股份有限公司 | 本营养测试仪适用于水培和农业应用，能够准确测量水中的营养液电导率（EC）单位为mS/cm，以及总溶解固体（TDS）转换为百万分之一（ppm）。 适合需要较高EC值的植物，该测试仪具有高达6.0... |
 |
PH-808防水笔式土壤PH计 | 卖方: 科立龙电子股份有限公司 | 两点按键校准,自动识别pH标准缓冲液 自动温度补偿确保全量程范围的精确测量。 自动电源关闭，有效节省电池能耗。 可替换型电极降低仪表维护与使用成 全防水性能保障在恶劣环境中对仪表的完整保... |
