Microbial Barrier Tester

Product Introduction:

Y/T 0471.5-2017 is a newly updated standard, which specifies the experimental method for evaluating the bacteria-inhibiting performance of the contact wound materials claimed to have bacteria-inhibiting performance. The bacteria-inhibiting test device can simultaneously meet the four test methods of wet bacteria-inhibiting, dry bacteria-inhibiting, semi-wet （dry outside and wet inside） bacteria-inhibiting, and semi-wet （wet outside and dry inside） bacteria-inhibiting.

Meet the standard:

EN 15194 ISO 4210

UL 2849 ECE R50

Equipment principle:

The sample was placed between two collets of a hemispherical glassware, a certain amount of standard bacterial solution was added to one side of the ware, and liquid medium was added to the other side, and the turbidity in the liquid medium was checked after a certain period of time

Or scrape the liquid to check for bacterial growth.

Product Advantages:

Ensures compliance with critical safety and performance standards for e-bike lighting.

Provides accurate and repeatable measurements of photometric and electrical parameters.

Allows for comprehensive evaluation of light distribution and beam patterns.

Facilitates durability testing under simulated environmental and mechanical stresses.

Supports efficient research and development of innovative and reliable lighting solutions.

Contributes to enhanced rider safety and visibility in various conditions.

Helps in meeting regulatory requirements for market access and product certification.

Product Features:

Goniophotometer: A precise instrument for measuring light intensity distribution in 3D space, essential for analyzing beam patterns and obtaining luminous intensity data.

Integrating Sphere: Used for measuring total luminous flux (lumens) and other integral photometric quantities, often with a spectroradiometer for color properties.

Photometers/Lux Meters: High-accuracy instruments for measuring illuminance at specific points or areas.

Programmable DC Power Supply: To provide stable and controllable power to the e-bike lighting device, simulating various battery conditions.

Electrical Measurement Unit: For measuring voltage, current, power consumption, and electrical efficiency of the lighting device.

Environmental Test Chambers: Chambers for simulating conditions such as extreme temperature, humidity, thermal shock, and salt spray.

Dust and Water Ingress Test Chambers: To evaluate the lighting device's IP (Ingress Protection) rating (e.g., IP6X, IPX7).

Vibration and Shock Test Systems: To assess the mechanical robustness and durability of the lighting device under typical e-bike operating conditions.

Control Software and Data Acquisition: Comprehensive software for automating test procedures, collecting data, analyzing results, and generating reports.

Fixture and Mounting: Adjustable fixtures to securely mount various types and sizes of e-bike lighting devices for testing.

Product configuration:

Two hemispherical glass devices, two glass plugs, two gooseneck glass tubes.

Other supplier products

	Conveyor needle detector	It is applicable to detect broken needle and iron matters inmany industries such as garment, textile, shoes and hats,home textiles, quilting etc. ...
	Medical Face Mask Differential Pressure Tester YY 0469-2011 YY 0969-2013	Standards: YY 0469-2011 Surgical mask YY 0969-2013 Single-use medical face mask EN 14683:2014 Medical face masks - Requirements and test methods ...
	Computer-controlled Helmet Impact Tester	Application Scope This testing instrument is applicable to the impact - energy absorption performance test of helmets. It is used to evaluate the ...
	Photovoltaic module backplane peeling strength testing machine	Introduction: The Photovoltaic Module Backplane Peeling Strength Testing Machine is a specialized device designed to evaluate the peeling strength...
	Goggles Puncture Resistance Testing Machine/ eyewear penetration test equipment/ Goggle penetration tester	Introduction： In environments where eye protection is critical, goggles are a frontline defense against hazards. But how do you ensure that these ...

All supplier products

Same products

	Air Permeability Tester STD- F8	Seller: Standard International Group (HK) Limited	The Air Permeability Tester is designed to quickly and accurately measure the breathability and p...
	Surface Performance Tester STD-FB4 - A	Seller: Standard International Group (HK) Limited	Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti...
	Compression Tester STD - FB3 - A	Seller: Standard International Group (HK) Limited	TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar...
	Single - Strand Bending Tester STD - FB2 - SH	Seller: Standard International Group (HK) Limited	Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ...
	Bending Tester STD- FB2 - S	Seller: Standard International Group (HK) Limited	Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig...