.

Particle Abrasion Tester

Particle Abrasion Tester
  • Particle Abrasion Tester
Produced by: Standard International Group (HK) Limited

All supplier products
Send product request

The Q-4D particle wear tester is specially designed as a standard instrument based on the national standard "Method for Determination of Wear Rate of Fertilizer Catalysts, Molecular Sieve, Adsorbent, etc." (GB3636-83), "3A Molecular Sieve" (GB, "4A Molecular Sieve" HG/2524-2011 "5A Molecular Sieve" (GB13550-92), "Test Method for Strength Determination of Wood Activated Carbon" (GB/T

"Industrial Activated Alumina"
HG/T3927-2007 and other test methods. It is a new generation of products launched after the Q-3 particle wear tester, with further improved performance and more reasonable structure.

It is widely used in the determination of wear rate of catalysts, molecular sieves, adsorbents, alumina and other particle materials in the chemical, pharmaceutical, petroleum and other industries.

This instrument uses a single-chip microcomputer to control the stepper motor to drive the grinding drum to wear the material. Because of the single-chip control, its speed is accurate, the speed is uniform and stable, and the noise is low.
The working status information of the instrument is indicated by LED light-emitting tube, which is clear and intuitive. In addition, it also has the functions of preset speed, setting alarm, setting pause, etc. The instrument has leading technology in China, reasonable structure, simple and intuitive operation, extremely stable and reliable performance, and extremely low failure rate. Therefore, it has a high performance-price ratio and is an ideal wear rate test device.

Main technical indicators:

Speed: 25r/min, 30r/min, 40r/min, 50r/min, 60r/min, 80r/min, 100r/min can be set arbitrarily.

Counting range: 0~9999 r

Grinding cylinder inner size: Φ36x300mm; Φ50x300mm two each

Power supply: AC 220v±10% 50HZ

Send product request

To: Standard International Group (HK) Limited
Your E-mail:
Message text:


Send to other suppliers

Other supplier products

Medical Mask Differential Pressure Tester EN 149 EN 14683
 Medical Mask Differential Pressure Tester EN 149 EN 14683 Standards: EN 149. EN 14683. ASTM F2100. MIL-M-36954C, GB 19083. GB 2626. YY/T 0969-2013 Applications: Medical Mask Differential Pressure Tester...
Sponge foam collapsible hardness tester
 Sponge foam collapsible hardness tester Purpose: This machine is used to measure the indentation hardness of porous elastic materials. The polyurethane foam sample can be tested accordin...
Catheter Leakage and Compliance Tester
 Catheter Leakage and Compliance Tester Catheter Residual Vacuum Tester - Other test instrument - standard Main Uses of the Catheter Leakage and Compliance Tester The catheter leakage a...
EN sole zigzag testing machine
 EN sole zigzag testing machine Product Introduction: The EN sole bending tester is used for 90 degree bending test of the sole of rubber, EVA and other zigzag shoes to detect it...
Intramedullary Nails Four - point Bending Fatigue Tester
 Intramedullary Nails Four - point Bending Fatigue Tester Standard YY/T 0591-2011: Chinese standard specifying bending fatigue test methods for intramedullary nails and locking screws, including load ap...
All supplier products

Same products

Air Permeability Tester STD- F8
Air Permeability Tester STD- F8 Seller: Standard International Group (HK) Limited The Air Permeability Tester is designed to quickly and accurately measure the breathability and p...
Surface Performance Tester STD-FB4 - A
 Surface Performance Tester STD-FB4 - A Seller: Standard International Group (HK) Limited Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti...
Compression Tester STD - FB3 - A
Compression Tester STD - FB3 - A Seller: Standard International Group (HK) Limited TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar...
Single - Strand Bending Tester STD - FB2 - SH
Single - Strand Bending Tester STD - FB2 - SH Seller: Standard International Group (HK) Limited Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ...
Bending Tester STD- FB2 - S
Bending Tester STD- FB2 - S Seller: Standard International Group (HK) Limited Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig...