.

Particle Abrasion Tester

Particle Abrasion Tester
  • Particle Abrasion Tester
供应商: 标准集团

供应产品
在线联系供应商

The Q-4D particle wear tester is specially designed as a standard instrument based on the national standard "Method for Determination of Wear Rate of Fertilizer Catalysts, Molecular Sieve, Adsorbent, etc." (GB3636-83), "3A Molecular Sieve" (GB, "4A Molecular Sieve" HG/2524-2011 "5A Molecular Sieve" (GB13550-92), "Test Method for Strength Determination of Wood Activated Carbon" (GB/T

"Industrial Activated Alumina"
HG/T3927-2007 and other test methods. It is a new generation of products launched after the Q-3 particle wear tester, with further improved performance and more reasonable structure.

It is widely used in the determination of wear rate of catalysts, molecular sieves, adsorbents, alumina and other particle materials in the chemical, pharmaceutical, petroleum and other industries.

This instrument uses a single-chip microcomputer to control the stepper motor to drive the grinding drum to wear the material. Because of the single-chip control, its speed is accurate, the speed is uniform and stable, and the noise is low.
The working status information of the instrument is indicated by LED light-emitting tube, which is clear and intuitive. In addition, it also has the functions of preset speed, setting alarm, setting pause, etc. The instrument has leading technology in China, reasonable structure, simple and intuitive operation, extremely stable and reliable performance, and extremely low failure rate. Therefore, it has a high performance-price ratio and is an ideal wear rate test device.

Main technical indicators:

Speed: 25r/min, 30r/min, 40r/min, 50r/min, 60r/min, 80r/min, 100r/min can be set arbitrarily.

Counting range: 0~9999 r

Grinding cylinder inner size: Φ36x300mm; Φ50x300mm two each

Power supply: AC 220v±10% 50HZ

在线联系供应商

至: 标准集团
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

Shoe Sole Heat Resistance Tester
 Shoe Sole Heat Resistance Tester Main uses: The sole heat resistance tester is used to test the heat resistance and temperature insulation performance of finished shoes under high...
Hexapod Tumbler test instrument
 Hexapod Tumbler test instrument Introduction Hexapod tumbler tester, also known as carpet appearance assessment tester, is designed to determine the appearance maintenance abilit...
Color fastness scrub tester Resistant
 Color fastness scrub tester Resistant Color fastness tester Resistant to scrub Application: Color fastness to washing used for all types of colored textiles dry and wet friction col...
Shoelace Abrasion Tester
 Shoelace Abrasion Tester Application: This shoelace abrasion tester is used for shoelace against standard eyelet abrasion testing, or eyelet against standard shoelace abra...
Photovoltaic module wire tube bending testing machine/ Solar PV Module Conduit Bending Tester/ Solar Panel Bend Testing System
Photovoltaic module wire tube bending testing machine/ Solar PV Module Conduit Bending Tester/ Solar Panel Bend Testing System Standard IEC 61730-2:2004: Photovoltaic (PV) Module Safety Qualification – Requirements for Testing CE Certification(Conformité Eu...
供应产品

Same products

PH-2398 pH/EC/ORP/温度 多参数测试仪
 PH-2398 pH/EC/ORP/温度 多参数测试仪 卖方: 科立龙电子股份有限公司 大显示，可同时进行水质PH、氧化还原电位、电导率、温度的测量； 带背光LCD显示清晰，功能齐全，精度高； 仪表采用微电脑测量与控制技术，具有自动校准功能，方便实用。 内置蓝牙，可以与电脑或...
ORP-2026S 防水型 土壤ORP&温度 二合一测试仪
 ORP-2026S 防水型 土壤ORP&温度 二合一测试仪 卖方: 科立龙电子股份有限公司 范围 ORP -999～999mV Temp 0～50℃ 分辨率 ORP 1mV...
防水型 EC /TDS/温度三合一参数测试仪
 防水型 EC /TDS/温度三合一参数测试仪 卖方: 科立龙电子股份有限公司 范围 EC ～19.9mS TDS Temp 0～50℃ 分辨率 ...
EC-98330 电导率营养测试棒
 EC-98330 电导率营养测试棒 卖方: 科立龙电子股份有限公司 本营养测试仪适用于水培和农业应用，能够准确测量水中的营养液电导率（EC）单位为mS/cm，以及总溶解固体（TDS）转换为百万分之一（ppm）。 适合需要较高EC值的植物，该测试仪具有高达6.0...
PH-808防水笔式土壤PH计
 PH-808防水笔式土壤PH计 卖方: 科立龙电子股份有限公司 两点按键校准,自动识别pH标准缓冲液 自动温度补偿确保全量程范围的精确测量。 自动电源关闭，有效节省电池能耗。 可替换型电极降低仪表维护与使用成 全防水性能保障在恶劣环境中对仪表的完整保...