water vapor permeability tester
This instrument is professionally applicable to the determination of water vapor transmission rate of plastic films, composite films, high barrier materials, back-sheets, sheeting, aluminum foils, waterproof materials, and other materials used in sanitary and medical industry.
By testing the water vapor transmission rate, the technical indexes of materials could be controlled to meet the requirements for production.
Features
- The system is controlled by micro-computer with LCD, menu interface and PVC operation panel, which could conveniently export test data, test results and test curves
- Wide range and high-precision of automatic temperature control to support combinations of non-standard test conditions
- The system could be extended for the water vapor transmission rate test of finished package containers by special customization
- Reference film for fast calibration to ensure the accurate and universal test data
- Equipped with micro-printer and RS232 port for convenient data transfer
- Supports LystemTMLab Data Sharing System for uniform management of test results and test reports
Principle
Under a certain test temperature, a constant humidity difference is generated between two sides of the test specimen. The water vapor permeates through the specimen into the dry side and then is taken to the sensor, where proportional electric signals will be generated. The water vapor transmission rate and other parameters can be obtained by analyzing and calculating these electrical signals.
Standards
This test instrument conforms to the following standards:
ISO 15106-3. GB/T 21529. DIN 53122-2. YBB 00092003
Applications
This instrument is applicable to the determination of water vapor transmission rate of:
Basic Applications
- Film
Including plastic film, plastic composite film, paper-plastic composite film, co-extruded film, aluminized film, aluminum foil, aluminum foil composite film, and many other films.
- Sheets
Includes engineering plastics, rubber and construction materials such as PP, PVC and PVDC.
- Paper and cardboard
Includes paper and cardboard, such as aluminum foil for cigarette packaging and Tetra Pak materials
- Packaging
Includes plastics, rubber, paper, paper-plastic composites, glass and metal packaging, such as Coke bottles, Tetra Pak materials, vacuum bags, metal three-piece cans, cosmetic and toothpaste tube packaging, and jelly cups.
Technical Specifications
| Specifications | Film Test |
|---|---|
| Test Range | 0.001 ~ 50 g/m2·24h (standard) 0.01 ~ 1000 g/m2·24h (optional) |
| Number of Specimens | 1 |
| Resolution | 0.1ppm |
| Temperature Range | 5°C ~ 95°C |
| Temperature Accuracy | ±0.1°C |
| Humidity Range | 0%RH, 2%RH ~ 98.5%RH, 100%RH (standard is 90%RH) |
| Accuracy | ±1%RH |
| Test Area | 38.48 cm2 |
| Thickness | < 1 mm (accessories required for thicker specimens) |
| Specimen Size | Φ100 mm |
| Carrier Gas | 99.999% High Purity Nitrogen (outside of supply scope) |
| Gas Flow | 100 mL/min |
| Gas Supply Pressure | ≥ 0.12 MPas |
| Port Size | 1/8 inch copper tubing |
| Instrument Dimension | 500 mm (L) x 400 mm (W) x 360 mm (H) |
| Power Supply | 220VAC 50Hz / 120VAC 60Hz |
| Net Weight | 36 kg |
Configurations
Standard Configurations
Instrument, Micro-printer, Constant Temperature Control Device, Precision Pressure Regulator for Nitrogen Cylinder, Porous Ceramic Tray, Desiccant, Round Sample Cutter and Vacuum Grease
Optional Parts
Professional Software and Communication Cable
Note
1. The gas supply port of the instrument is 1/8 inch copper tubing;
2. Customers will need to prepare for gas supply, distilled water, and salt reagent.
Send product request
Other supplier products
 |
Thermal - Cold Cycle Testing Machine/ Cold and Hot Cycle Tester / Environmental Thermal Cycling Tester | Standard BS 7291: Compliant for thermal cycling tests on thermoplastic pipe systems (1769 Series with pressure chamber). Adaptive Certification... |
 |
Respirator Fit Tester | PortaCount Respirator Fit Tester:Qinsun assesses the overall integrity of masks by performing an aerosol leak test utilizing the PortaCount Respira... |
 |
Whole shoe breathability and heat preservation testing machine/ Footwear Breathability and Insulation Tester / Shoe Air Permeability Tester | Standard SATRA TM376: Thermal insulation testing of footwear with sock integration. SATRA TM386: Water vapor permeability assessment for athlet... |
 |
Hexapod Tumbler test machine | Introduction The steel ball or the hexagonal feet randomly roll in the rotating drum, which is covered with carpet textile samples. Observe the ap... |
 |
Digital Fabric Thickness Gauge | Standards: Standards ASTM D1777 Standard test method for thickness of textile materials GB/T 3820 Determination of thickness of textiles and tex... |
Same products
 |
Full-Body Garment Stress Tester,FZ/T 70015 | Seller: Standard International Group (HK) Limited | TheFull-Body Garment Stress Testeris a precision instrument designed to quantify the pressure exe... |
 |
Industrial Dry Cleaning Machine,industrial garment steamer | Seller: Standard International Group (HK) Limited | TheIndustrial Dry Cleaning and Energy-Saving Dryer Machinesare designed for high-performance, rel... |
 |
MST Medical Compression Stocking Tester,compression sock tester | Seller: Standard International Group (HK) Limited | The MST Medical Compression Stocking Tester is a professional instrument designed to evaluate the... |
 |
MMT Liquid Water Separation Tester,MMT Liquid Water Analysis Tool | Seller: Standard International Group (HK) Limited | Applications Textile Manufacturing:Testing waterproof fabrics for outdoor gear R&D:Developi... |
 |
Dental material color stability tester | Seller: Standard International Group (HK) Limited | Application The applications of color stability testers for dental materials are mainly reflecte... |
