Shoelace Abrasion Tester
Application:
This shoelace abrasion tester is used for shoelace against standard eyelet abrasion testing, or eyelet against standard shoelace abrasion testing. This tester is suitable for all kinds of shoelace and eyelet.
Standards:
SATRA TM93
Principle：
Let shoelace cross the eyelet clamped on the fiber board, make the shoelace and eyelet form into 90 degree, make the fiber board and shoelace form into 45 degree. Then straining reciprocated the shoelace under the standard tension by eyelet. While the shoelace is damaged, stop the testing.
Product Advantages:
Measures Key Durability of Lacing System: Evaluates the wear resistance of both shoelaces and eyelets, critical for footwear performance and lifespan.
Standard Compliant: Designed to meet standards like SATRA TM93. ensuring recognized and comparable test results.
Quantitative Result: Provides objective data, typically the number of cycles to failure.
Controllable Test Parameters: Allows for precise setting and control of tension, stroke length, and test speed.
Multiple Testing Stations: Equipped with multiple positions (6) for simultaneous testing, increasing efficiency.
Simulates Realistic Abrasion: The setup and reciprocating motion simulate the rubbing action that occurs during footwear use.
Versatile Application: Suitable for testing various types of shoelaces and eyelets.
Product Features:
Multiple test positions or stations (6 positions) for simultaneous testing of multiple shoelace-eyelet pairs.
Mechanism to securely clamp a standard eyelet mounted on a fiberboard.
System to position the shoelace and eyelet at specified angles (90 degrees and 45 degrees).
Tensioning system that applies a standard load to the shoelace using weights (455g ± 5g per position, 6 weights included).
Mechanism to reciprocate the shoelace back and forth through the eyelet with a controlled movable stroke (76 ± 2 mm).
Controllable test speed (100 ± 5 cpm) for the reciprocating motion.
Touch-screen control interface for setting test parameters and monitoring the test.
Integrated digital counter (0-999.999 range) to track the number of abrasion cycles performed.
Designed to utilize standard eyelets (Brass, Inner diameter: 4.5mm) and fiberboard (25$times$25mm, Inner diameter 5.0 ± 0.2mm).
Robust construction suitable for repetitive abrasion testing.
parameters：
Position：6 positions
Weights：455g ± 5g , 6pcs
Control method：Touch-screen control, 0~999.999
Standard eyelet：Brass, Inner diameter: 4.5mm
Fiberboard：25×25mm, Inner diameter 5.0 ± 0.2mm
Movable stroke：76 ±2 mm
Test speed：100±5cpm
Power supply：1∮AC 220V 50/60HZ
Dimensions(W×D×H)：57x58x1025px
Weight(approx.)：60 kg(excluding weight)
Send product request
Other supplier products
 |
Photovoltaic module damp heat test chamber | Standard IEC 61215: Terrestrial Photovoltaic (PV) Modules – Design Qualification and Type Approval UL 1073: Standard for Safety for Enclo... |
 |
Pipe drop hammer impact testing machine | Pipe drop hammer impact testing machine - Other test instrument - standard Product Information: Product Introduction: 1. Name: drop hammer impac... |
 |
Automated Image Stitching Measurement System | Performance Overview: Automatic one-key flash splicing special measuring instrument is a one-key fast special measuring equipment designed and man... |
 |
Hydraulic Oil Filtration and Dewatering Tester | Applications: Hydraulic and lubrication system oil purification and filtration; Hydraulic and lubrication system oil degassing; Hydraulic and lu... |
 |
Hexapod Tumbler test instrument | Product Information: Hexapod tumbler tester, also known as carpet appearance assessment tester, is designed to determine the appearance maintenanc... |
Same products
 |
Scott Flex Tester | Seller: Standard International Group (HK) Limited | Product Introduction: Scott kneading tester is suitable for back and forth kneading resistance o... |
 |
NEU nanofiber electrospinning device | Seller: Standard International Group (HK) Limited | Content The Nanofiber Electrospinning Unit uses electrospinning techniques to safely and easil... |
 |
KK03 Scratch tester | Seller: Standard International Group (HK) Limited | Product Introduction: With the continuous expansion of the use of plastic molding products, from... |
 |
KK02 Scratch tester | Seller: Standard International Group (HK) Limited | Product Introduction: With the continuous expansion of the use of plastic molding products, from... |
 |
KK01 Scratch tester | Seller: Standard International Group (HK) Limited | Product Introduction: With the continuous expansion of the use of plastic molding products, from... |
