Solid Auto - ignition Point Tester/ Solid Material Autoignition Tester/ Self-Ignition Point Tester

• 

Product Introduction

This tester determines the self - ignition characteristics of solid chemical products by placing the substances in a 20mm - side - length cubic wire mesh and increasing the temperature. It complies with standards such as GB/T 21756 - 2008 *Determination of the Relative Self - Ignition Temperature of Solid Substances in Chemical Products for Industrial Use* and NF T20 - 036.

Product Features

1. It adopts an embedded processor and the Windows CE operating system.

2. With an 8 - inch liquid - crystal touch screen, it can display the test status in real - time.

3. It supports two working modes, the "standard mode" and the "custom mode" (during the custom experiment, it can save the exothermic peak value in real - time, etc.), taking into account both the standardization and flexibility of the test.

4. It integrates high - temperature heat - insulation technology, temperature control, and precise detection technology.

5. It uses an electrically heated muffle furnace with natural air - circulation convection to ensure uniform heating of the samples.

6. The furnace cavity is made of heat - insulating vacuum ceramic fiber, which has a good heat - insulation effect.

7. The cubic wire mesh is hung at the bottom of the furnace cover, making it safe and convenient to place samples.

8. It realizes automatic heating control, temperature control, and combustion detection.

9. A cleaning rod is provided for cleaning the inner cavity's central through - hole.

10. A debris tray is provided to collect samples falling from the wire mesh and residual samples cleaned out by the rod.

11. A cooling bracket is provided to place the assembled furnace cover on it for cooling after the test.

12. It uses a thermocouple sensor to quickly and accurately respond to temperature changes.

13. It displays the time -temperature curve in real - time, and the original data can be viewed.

14. The test process is fully automated, requiring no manual intervention. It supports functions such as parameter setting, data storage, and report viewing.

Technical parameters

Other supplier products

	The resistance tester for protective clothing materials against metal molten liq/ISO 9150/ AQ6103	Standards: BS EN 348:1992 Protective clothing. Heat-resistant and fire-resistant. Determination of heat transfer in proximity to fire. ISO 9185 - ...
	Protective Clothing Against Acid and Alkali Tester BS EN 463-1995 ISO 6529-2013	Standards: GB 24540-2009《protective clothing against liquid acids and alkalis 》Appendix D ISO 6529-2013 Protective clothing-protection against che...
	Helmets Designated Protection Areas Tester	Main Purposes 1. Used to mark test points and test lines on helmets. 2. Used for line - marking according to different test standards. 3. Used t...
	Auto ignition Point Liquids Tester	Standards: This product complies with GB/T 21860 - 2008 *Test Method for Auto - ignition Temperature of Liquid Chemicals* and ASTM E659 - 78(2005)...
	hydrostatic head testing equipment/ Hydrostatic Pressure Tester / Water Pressure Resistance Tester	Hydrostatic head testing equipmentIntroductionThe hydrostatic head tester is designed to test the pressure that the material does not come into con...

Same products

	pH-2398 pH/EC/ORP/Temperature multi-parameter Water Quality Tester	Seller: Kelilong Electron Co.,Ltd	Feature Large display screen, capable of simultaneously measuring water quality pH, redox potent...
	ORP-2026S Waterproof Soil ORP and Temperature Meter	Seller: Kelilong Electron Co.,Ltd	范围 ORP -999～999mV Temp 0～50℃ 分辨率 ORP 1mV...
	TDS-2616 Waterproof EC/TDS/Temperature Meter	Seller: Kelilong Electron Co.,Ltd	Range EC ～19.9mS TDS Temp 0～50℃ R...
	EC-98330 CF ECOstick - Nutrient Tester	Seller: Kelilong Electron Co.,Ltd	Ideal for hydroponics and agriculture applications, theNutrient Tester accurately measures the el...
	PH-808 Waterproof Soil PH Meter	Seller: Kelilong Electron Co.,Ltd	Model PH-808 Range PH ～14.00PH Temp 0～50℃ ...