Solid Auto - ignition Point Tester/ Solid Material Autoignition Tester/ Self-Ignition Point Tester
Product Introduction
This tester determines the self - ignition characteristics of solid chemical products by placing the substances in a 20mm - side - length cubic wire mesh and increasing the temperature. It complies with standards such as GB/T 21756 - 2008 *Determination of the Relative Self - Ignition Temperature of Solid Substances in Chemical Products for Industrial Use* and NF T20 - 036.
Product Features
1. It adopts an embedded processor and the Windows CE operating system.
2. With an 8 - inch liquid - crystal touch screen, it can display the test status in real - time.
3. It supports two working modes, the "standard mode" and the "custom mode" (during the custom experiment, it can save the exothermic peak value in real - time, etc.), taking into account both the standardization and flexibility of the test.
4. It integrates high - temperature heat - insulation technology, temperature control, and precise detection technology.
5. It uses an electrically heated muffle furnace with natural air - circulation convection to ensure uniform heating of the samples.
6. The furnace cavity is made of heat - insulating vacuum ceramic fiber, which has a good heat - insulation effect.
7. The cubic wire mesh is hung at the bottom of the furnace cover, making it safe and convenient to place samples.
8. It realizes automatic heating control, temperature control, and combustion detection.
9. A cleaning rod is provided for cleaning the inner cavity's central through - hole.
10. A debris tray is provided to collect samples falling from the wire mesh and residual samples cleaned out by the rod.
11. A cooling bracket is provided to place the assembled furnace cover on it for cooling after the test.
12. It uses a thermocouple sensor to quickly and accurately respond to temperature changes.
13. It displays the time -temperature curve in real - time, and the original data can be viewed.
14. The test process is fully automated, requiring no manual intervention. It supports functions such as parameter setting, data storage, and report viewing.
Technical parameters
|
Working Environment |
(5～40)℃, <85%RH |
|
Test Objects |
Solid |
|
Temperature Control Range |
Room temperature～650℃ |
|
Standard Rise Rate |
0.5 ℃/min |
|
Customized Rise Rate |
(0.1～3.0)℃/min |
|
Temperature Measurement Range |
(0～800)℃ |
|
Temperature Measurement Resolution |
0.1 ℃ |
|
Temperature Measurement Accuracy |
±2.5 ℃ below 300 ℃ |
|
Heating Chamber Capacity |
±(0.75% of the reading) above 300 ℃ |
|
Timing Range |
2L |
|
Mesh Cage Size |
(0～96)h |
在线联系供应商
Other supplier products
 |
Protective clothing flame spread tester ISO 15025 | Applications: The instrument is applied for thetesting of fire hazard using com-bustible materials, like fabric orother similar functional materia... |
 |
Safety shoe impact testing machine | Safety shoe impact testing machine - Other test instrument - standard Product Introduction: According to standards BS-953,1870,EN-344,ANSI-Z41,CS... |
 |
High temperature vacum friction & wear tester | Main uses: High temperature vacuum friction and wear testing machine is mainly used to study the friction and wear characteristics of materials in... |
 |
Hydraulic Oil Filtration and Dewatering Tester | Applications: Hydraulic and lubrication system oil purification and filtration; Hydraulic and lubrication system oil degassing; Hydraulic and lu... |
 |
Carpet Dynamic Load Tester | Instrument Features - Provide information on the reduction in the thickness of carpet pile - Imitate the pressure and shearing effects genera... |
Same products
 |
Air Permeability Tester STD- F8 | 卖方: Standard International Group (HK) Limited | The Air Permeability Tester is designed to quickly and accurately measure the breathability and p... |
 |
Surface Performance Tester STD-FB4 - A | 卖方: Standard International Group (HK) Limited | Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti... |
 |
Compression Tester STD - FB3 - A | 卖方: Standard International Group (HK) Limited | TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar... |
 |
Single - Strand Bending Tester STD - FB2 - SH | 卖方: Standard International Group (HK) Limited | Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ... |
 |
Bending Tester STD- FB2 - S | 卖方: Standard International Group (HK) Limited | Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig... |
