Filter Media Dynamic Filtration Performance Tester/ Filter Media Performance Tester / Dust Filter Media Performance Tester
Theis mainly used to test the filtration performance of filter materials. The equipment itself is easy to operate, compact, and sturdy in design.
The dust concentration value of the filtration test can be adjusted quickly and conveniently, and the actual use simulation degree is high, simulating a variety of actual conditions. Afterward, the particle size and concentration are measured online by the digital system of the light scattering spectrometer.
As a modern technology enterprise integrating R&D, manufacturing, sales, training, and service, Standard Group (Hong Kong) Co., Ltd. is committed to delivering more testing instruments to the market, providing testing instruments for textiles, leather, combustion, automotive interior and exterior trims, material environmental climate aging, etc., and non-standard customization is also acceptable. Targeted tests can be carried out according to customer requirements before purchase to ensure that the purchased instruments are suitable.
Comply with the standards:
GB/T6719-2009 Technical requirements for bag dust collectors
ISO 11057-2011 Filter performance test of cleanable filter media
VDI 3926-2004 Filter performance test of cleanable filter media
Main features:
1. The dynamic performance detection device for filter materials has the advantages of reasonable structural design, accurate test parameters, and simple and easy operation. It can complete comprehensive performance tests such as resistance and efficiency of filter material cleanliness, aging, and stability.
2. Color LCD operation interface, digital graphics processing, and XDT software can independently display the Chinese interface and edit and process the curve. It has two functions: custom and programmable, and comes with 5 standard test methods. It has a fault self-calibration function. It has an operation encryption function and can be remotely controlled.
Experimental process:
1. Initialization treatment: Determination of dust filtration performance of initial filter material sample, cleaning is performed when pressure loss reaches 1000Pa, and the weight gain of high-efficiency filter membrane and outlet dust concentration is measured and recorded after 30 repetitions;
2. Aging treatment: 10,000 aging treatments with 5-second intervals;
3. Stabilization treatment: Stabilization treatment, installation process A performs 10 dust filtration and cleaning operations;
4. Stabilization treatment: Perform 30 dust filtration and cleaning operations according to A.
Experimental parameters:
Particle type: non-sticky dry powder
Continuous operation time: 1-50 hours
Compressed air requirements: maximum 6bar
Dust mass flow: 0.05g/h-20g/h, continuously adjustable, stability less than 5%
Aerosol outlet mass concentration: 0.012g-13g/h
Power requirements: 100-260VAC/47-63Hz
Filter material test area: 140mm
Filter wind speed: 1-3m/min adjustable
Horizontal pipe flow: 0-3m³/h
Extensible bypass pipe
Pressure sensor: 0-2000Pa, accuracy 2%
Backflush pressure: 0.2-0.6MPa (and can be set by yourself)
Backflush time: 50ms-200ms (and can be set by yourself)
With a time-controlled pulse valve and pressure-controlled pulse valve
Suction flow controller: mass flow meter 80LPM, accuracy 0.1LPM
Dust dispersion compressed air control: Mass flow meter 20LPM, accuracy 0.1LPM
Vacuum pump: 8m³/h, 4X10-4mbar, 550W
Filter material filtration performance control software: capable of sampling pressure signals for A, B, C, and D filtration processes; automatic control of constant pressure injection; injection control during aging process; with manual, semi-automatic, and automatic testing
Control mode: NEU data processing mode.
Send product request
Other supplier products
 |
Shoe Peeling Strength Tester | Main uses: The shoe stripping tester is mainly used to measure the bonding strength between the upper and the sole or other shoe components. By si... |
 |
Micro - displacement Friction Testing Machine for Helmet Webbing | Micro - displacement Friction Testing Machine for Helmet Webbing - Material and Parts of Automotive - standard Standards: ECE R22.05 Appli... |
 |
Particle Abrasion Tester | The Q-4D particle wear tester is specially designed as a standard instrument based on the national standard "Method for Determination of Wear Rate ... |
 |
Nissan 4-Station Abrasion Tester for Multi-Material Durability Tester | Standard ASTM D3884(Standard Guide for Abrasion Resistance of Textile Fabrics) ISO 5470-1(Rubber- or Plastics-Coated Fabrics - Abrasion Resistanc... |
 |
SCHAP Fogging Tester for Automotive & Textile Materials | Standard DIN 75201(Determination of the Evaporation Behavior of Materials in Motor Vehicles) ISO 6452(Rubber- or Plastics-Coated Fabrics — ... |
Same products
 |
Air Permeability Tester STD- F8 | Seller: Standard International Group (HK) Limited | The Air Permeability Tester is designed to quickly and accurately measure the breathability and p... |
 |
Surface Performance Tester STD-FB4 - A | Seller: Standard International Group (HK) Limited | Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti... |
 |
Compression Tester STD - FB3 - A | Seller: Standard International Group (HK) Limited | TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar... |
 |
Single - Strand Bending Tester STD - FB2 - SH | Seller: Standard International Group (HK) Limited | Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ... |
 |
Bending Tester STD- FB2 - S | Seller: Standard International Group (HK) Limited | Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig... |
