Putty sanding tester
How it works:
By placing the sample of primer and putty to be measured on the rotating grinding wheel (or grinding head)， the sample is polished back and forth under a certain load. The grinding frequency can be read directly by the counter, and the grinding resistance of the primer and putty can be assessed according to the load weight, grinding frequency and wear degree.
Technical parameters:
The technical parameters of the putty sanding tester may vary from model to model, but usually include the following aspects:
Friction speed: Generally adjustable in the range of 0——190 times/min (one way)， the specific speed can be set according to test requirements.
Test stroke: usually 155mm, that is, the movement distance of the grinding head on the sample.
Setting range: The range of grinding times that the counter can be set, generally 0——9999 times (one-way count)， and the two-way count needs to be multiplied by 2.
Load: The load of the grinding head includes the weight of the grinding head itself (such as 570+±15 grams) and the counterweight block that can be added (such as 50+3 grams, 100+4 grams, 200+7 grams each) to simulate different grinding pressures.
Test template specifications: generally tinplate, size 50x120mm or 200mmx80mm(thickness 0.3——1.5mm)， the specific size may vary depending on the instrument model.
Power supply and power: Usually 220V 50Hz/60Hz power supply, the power is about 40W.
Dimensions and weight: Dimensions may vary depending on the instrument model, but are generally compact and easy to operate; The weight is also within an acceptable range for easy movement and placement
Standard:
GB/T 1770
Send product request
Other supplier products
 |
Cleanliness Analysis System | Production： The cleanliness analysis system fully complies with the requirements of standards such as VDA19.1 - 2015. ISO16232. ISO4406. ISO4407. ... |
 |
rain tester AATCC 35 BS EN ISO 22958 | Standards: AATCC 35. BS EN ISO 22958 Applications: Rain Tester is designed for determining the water-repellent property of fabrics or composite ... |
 |
Medical Face Mask Differential Pressure Tester | Introduction:Medical face mask differential pressure tester also called mask breathility tester is to determine the breathability of medical face m... |
 |
Filter Flow Resistance Tester | Meet the standard: ISO 3968 SAE J806 Product Introduction: The Filter Flow Resistance Tester operates by circulating a test fluid (such as hy... |
 |
The near-infrared spectroscopy analyzer for textile fiber components | Overview: The near-infrared spectroscopy analyzer for textile fiber components is suitable for qualitative and quantitative detection of textiles.... |
Same products
 |
Air Permeability Tester STD- F8 | Seller: Standard International Group (HK) Limited | The Air Permeability Tester is designed to quickly and accurately measure the breathability and p... |
 |
Surface Performance Tester STD-FB4 - A | Seller: Standard International Group (HK) Limited | Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti... |
 |
Compression Tester STD - FB3 - A | Seller: Standard International Group (HK) Limited | TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar... |
 |
Single - Strand Bending Tester STD - FB2 - SH | Seller: Standard International Group (HK) Limited | Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ... |
 |
Bending Tester STD- FB2 - S | Seller: Standard International Group (HK) Limited | Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig... |
