Protective Dlothing Splash Spray Liquid Thickness Tester ISO 6529-2013 BS EN 463-1995
Standards
GB 24540-2009《protective clothing against liquid acids and alkalis 》Appendix D ISO 6529-2013 Protective clothing-protection against chemicals-determination of resistance of protective clothing materials to permeation by liquids and gases. BS EN 463-1995 Protective clothing-protection against liquid chemicals- Test method determination of resistance to penetration by a jet of liquid (Jet test) BS EN 468-1995 Protective clothing– protection against liquid chemicals, performance requirements for chemical protective clothing with spray-tight connections between different parts of the clothing.
Applications
This instrument can test the splash spray liquid thickness of water adsorption material made indication clothing. Judge the splash spray thickness by the dirt area on indication clothing.
Introduction
Protective clothing splash spray liquid thickness tester do the test to the manikin model which wears the indication and protecting clothing. Spray the solution to the productive clothing on manikin or human, check the internal surface of protective clothing or the external surface of indication clothing on manikin or human. Through compare with the standard contamination area, judge whether the productive clothing meeting requirement.
Technical Parameters
| Item | Parameter |
| Language | Chinese /English |
| Test Mode | Dynamic, Custom |
| Turntable speed | 1 rad/s |
| Spray nozzle installation space on spray rod | 450mm |
| Nozzle spray angle | 75° |
| Nozzle spray pressure | 300kPa |
| Nozzle flow velocity | (1.14±0.1)L/min |
| Time set range | 0-99.99s |
| Resolution Ratio | 0.01s |
| Power supply | 120 /230 V，50/60 Hz， 2A/1A |
Send product request
Other supplier products
 |
Static Tensile Tester | Standards: Standard Accordance with the requirements of the standards such as ASTM D3107 Applications: Static Tensile Tester isused for st... |
 |
Motorcycle Helmet Sand Drop Tester/ Helmet Falling Sand Tester/ Motorcycle Falling Sand Abrasion Tester | Introduction: Motorcycles endure a relentless barrage of environmental elements, and few components face as much abuse as their exterior surfaces.... |
 |
Metal Bone Screws Self Tapping Tester | Standard ISO 6475: Implants for surgery – Wear of total hip-joint prostheses ASTM F543: Standard Specification and Test Methods for Metal... |
 |
Thermal cycle wet freezing testing machine | Standard IEC 61215: Terrestrial Photovoltaic (PV) Modules – Design Qualification and Type Approval UL 1073: Standard for Safety for Enclo... |
 |
Fabric ici pilling and snagging box | Fabric ici pilling and snagging boxis composed of the same speed motor drive, and to maintain the speed of 60rpm. Rotating ring number can be found... |
Same products
 |
Plastic Smoke Density Tester F313 | Seller: Standard International Group (HK) Limited | The F313 Plastic Smoke Density Tester is a precision instrument designed to measure the specific ... |
 |
Xenon Test Chamber | Seller: Standard International Group (HK) Limited | Features and Benefits 1.The use of xenon arc lamp as a light source, can simulate the full sunli... |
 |
Single Cable Vertical Flame Tester | Seller: Qinsun Instruments Co., LTD | Introduction Single Cable Vertical Flame Tester is used for the vertical flame propagation of a ... |
 |
Safety Helmet Flammability Tester | Seller: Qinsun Instruments Co., LTD | Product Introduction: Safety hat flame retardant performance tester for safety hat flame retarda... |
 |
Furniture flammability tester | Seller: Qinsun Instruments Co., LTD | Product details Furniture flammability tester is mainly used to test the combustion performance ... |
