Geomembrane Hydrostatic and Permeability Tester-QINSUN
Scope of application:
It is used to test the hydrostatic pressure resistance and permeability coefficient of nonwoven composite geotextile （one cloth, one film, two cloth, one film） produced with polyethylene and polyurethane as the substrate and other materials under the specified water pressure difference conditions.
Meet the standard:
GB/T19979.1-2005,GBT19979,2-2006,GB/T17642,JTG E50 T1142-2006,JTS/T 245-2023, etc
Instrument features:
Can be used in one machine, equipped with 2 sets of test fixtures, in line with the national standard hydrostatic pressure and permeability coefficient test;
High precision pressure system, using gas-liquid mixed structure, to ensure stable pressure;
Solenoid valve control water inlet and outlet;
Equipped with percolating water collection device to prevent the collected percolating water from evaporating;
Equipment safety protection device.
Technical parameters:
Specimen diameter 200mm
The hole diameter of the perforated plate is 3mm±0.05mm
The center distance of the perforated plate is 6mm
Infiltration water collection pipe capacity 15ml
The precision of the permeable water collection tube is 0.1ml
Pressure range 0——2.5MPa
The pressure system error is ±2%6
Dimensions 900x600x1450mm（LxWxH）
Weight 150kg
Send product request
Other supplier products
 |
Alcohol burner combustion tester | This tester is developed and manufactured in accordance withAlcohol burner combustion tester; The instrument is suitable for non-metallic products ... |
 |
Fiber Oil Extractor | Rapid Grease Extraction Apparatus Testing Standards ofRapid Grease Extraction Apparatus:Edana method ERT 155 Applications: Rapid Grease Extracti... |
 |
High and low temperature universal creep testing machine | Product Introduction: High and low temperature universal creep testing machine is mainly used for non-metallic materials creep, stress relaxation,... |
 |
Customized barrel pump setup catalyst | Pressureless Feeder Pressureless Double Layer Feeder Pneumatic Pumping Equipment Hood Alley Feeder Hooded High Pressure Feeder Double ... |
 |
Impact strength tester for car seat launching headrest-QINSUN | Main parameters: Impact speed:The impact speed of the tester is usually between 25 and 30km/h, which is a key parameter to simulate vehicle coll... |
Same products
 |
Air Permeability Tester STD- F8 | Seller: Standard International Group (HK) Limited | The Air Permeability Tester is designed to quickly and accurately measure the breathability and p... |
 |
Surface Performance Tester STD-FB4 - A | Seller: Standard International Group (HK) Limited | Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti... |
 |
Compression Tester STD - FB3 - A | Seller: Standard International Group (HK) Limited | TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar... |
 |
Single - Strand Bending Tester STD - FB2 - SH | Seller: Standard International Group (HK) Limited | Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ... |
 |
Bending Tester STD- FB2 - S | Seller: Standard International Group (HK) Limited | Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig... |
