Computer-controlled Helmet Impact Tester

A computer-controlled helmet impact tester is an instrument used to test the impact resistance and penetration resistance of helmets. It quantitatively measures the impact resistance and energy absorption capacity of helmets by simulating the impact of objects falling from a height. The core principle of the testing instrument is the law of conservation of energy and the momentum theorem. During testing, the impact hammer is raised to a specified height, released, and allowed to fall freely, converting potential energy into kinetic energy to deliver a sudden impact to the helmet sample.

Application

This testing instrument is applicable to the impact - energy absorption performance test of helmets. It is used to evaluate the impact - resistance performance and penetration - resistance of helmets.

Standard

GB 811:Helmets for motorcycle and electric bicycle users

GB 24429:Sports helmets - Safety requirements and testing methods for sports helmets for cyclists and users of skateboards and roller skates

GB/T 38305-2019:Head protection—Rescue helmets

GA 44:Helmets for firemen

IS 4151:Helmet Standard for India

DOT FMVSS No. 218:Federal Motor Vehicle Safety Standard No. 218

ECE R22.05:Uniform Provisions Concerning the Approval of Protective Helmets and Their Visors for Drivers and Passengers of Motor Cycles and Mopeds

EN 1078:Helmets for cyclists and for users of skateboards and roller skates

Feature

High Precision: Utilizes a servo motor and hollow gear reduction system to ensure high accuracy and reliability of testing.

Automation: Automatically lifts the fixture to a predetermined height, displaying height, peak acceleration, test curve, impact velocity, impact time, and impact energy in real time.

Multifunctional: Employs a direct-drive transmission system with high positioning accuracy, long lifespan, low friction, and capable of high-speed and bidirectional rotation.

Safe and Fast: Features a position limiting function, making tests with position limitations safer and faster.

Wide Application Range: Offers a very wide measurement range, suitable for standards in multiple countries.

Integrated Design: Adopts an integrated design principle; regardless of the host configuration, only the corresponding parameters on the computer need to be modified (parameters can be saved), eliminating the need for circuit adjustments.

Parameters

System Component/Feature	Description
System components	Consists of a crash test stand and an analysis recorder
Crash test bench composition	Comprises a fall guidance device, head type, head type fixed frame, ball joint, anvil, anvil seat, release guidance system, and seat base, among other components
Impact height	Control interface setting, with guidance system, acceleration detection and calibration device (customizable from 1000 ~ 3000mm)
Base	Optimal solution is made of reinforced concrete; the instrument's steel base is connected to the concrete base, with a mass not less than 1600kg
Test and Analysis Instrumentation System	Comprises acceleration sensors or impact sensors, amplifiers, and components for data processing, display, and recording, among others
Dimensions (LWH cm)	9080450 (according to the set impact height)
Weight (kg)	350
Power supply	AC 220V 50Hz 500W
Environment	10 ~ 35 ℃
Operation	On the floor, connected to the concrete pedestal

Accessoriess

Headform

Impact hammer

Penetration hammer

Accelerometer

Infrared speed sensor

Control board

Control box

Main unit

Dedicated computer and control software

Test Procedures

Sample preparation: Mount the helmet onto the appropriately sized test headform as required, and connect the power supply.

Open the computer software: Simultaneously click the touchscreen control screen to start the test.

Start the test: Start the testing machine, causing the pendulum to impact the headform with a predetermined energy.

Data analysis: Record and analyze the waveform data to evaluate the helmet's impact absorption performance and rotational kinematics.

Other supplier products

	Aluminum Ointment Tube Toughness Tester	The ductility tester for aluminum tubes is a device specifically used to detect the ductility indicators of packaging materials such as aluminum so...
	Goggles Puncture Resistance Testing Machine	Applicable standards: GB 811-2010 ECE R22.05 EN1077 Purpose It is to make a certain weight of sharp objects fall from the height specified i...
	Rolling load tester	Standard EN 1569: Determines rolling load resistance of synthetic sports surfaces (e.g., PU, PVC, rubber). EN 14904: Tests performance of multi-s...
	Leather edge oil fatigue testing machine	The Leather Edge Oil Fatigue Testing Machine is designed to evaluate the fatigue resistance of edge coatings applied on leather, synthetic leather,...
	Building material products single combustion tester	Product Information Single Burning Items(SBI), as a European evaluation of the fire-resistance performance of building materials, measures heat ...

All supplier products

Same products

	Full-Body Garment Stress Tester,FZ/T 70015	Seller: Standard International Group (HK) Limited	TheFull-Body Garment Stress Testeris a precision instrument designed to quantify the pressure exe...
	Industrial Dry Cleaning Machine,industrial garment steamer	Seller: Standard International Group (HK) Limited	TheIndustrial Dry Cleaning and Energy-Saving Dryer Machinesare designed for high-performance, rel...
	MST Medical Compression Stocking Tester,compression sock tester	Seller: Standard International Group (HK) Limited	The MST Medical Compression Stocking Tester is a professional instrument designed to evaluate the...
	MMT Liquid Water Separation Tester,MMT Liquid Water Analysis Tool	Seller: Standard International Group (HK) Limited	Applications Textile Manufacturing:Testing waterproof fabrics for outdoor gear R&D:Developi...
	Dental material color stability tester	Seller: Standard International Group (HK) Limited	Application The applications of color stability testers for dental materials are mainly reflecte...