Keyboard Key Life Testing Machine
The Keyboard Key Life Testing Machine is designed to evaluate the durability and lifespan of keys and buttons across electronic devices. It is suitable for testing keys on mobile s, MP3 players, computers, electronic dictionaries, remote controls, silicone rubber keys, and other silicone products. The machine supports multiple key types including mechanical switches, film switches, and tap switches. Adjustable speed, configurable number of actuations, and multi-station testing ensure precise and flexible testing for various key designs and customer requirements.
Application
(1) Life cycle testing of mobile keys, MP3/MP4 buttons, computer keyboards, and electronic dictionary keys.
(2) Durability testing for remote control buttons and silicone rubber keys.
(3) Verification of mechanical switches, tap switches, and film switches.
(4) Multi-point testing on each key to simulate real-world usage.
(5) Research and development for new key materials and designs.
(6) Quality control in electronic and consumer device manufacturing.
(7) Testing under varying key pressures and stroke heights to replicate user behavior.
(8) Comparative testing for different key types and configurations.
Standards
(1) GB/T 4967-95 – Silicone rubber and keypad life testing.
(2) Equivalent JIS and IEC standards for key life and durability testing.
Features
(1) Motor-driven eccentric mechanism provides precise vertical motion to actuate keys.
(2) Adjustable test speed from 5 to 60 times/min.
(3) Multi-station testing: 4, 5, or 8 stations can operate simultaneously.
(4) Individual control of each test head for custom pressure and stroke height.
(5) Configurable test load from 0 to 500g (or specified by customer).
(6) User-friendly operation and flexible fixture design for various key types.
(7) Digital counter records the number of key actuations for accurate life assessment.
(8) Allows simultaneous testing of multiple products at different points.
Parameters
| Parameter | Specification |
|---|---|
| Number of test stations | 4, 5, or 8 |
| Test load | 0–500g (adjustable or specified) |
| Test stroke | 0–60mm |
| Test speed | 5–60 times/min |
| Power supply | AC 220V 3A (or specified) |
| Control | Individual control for each test head |
| Drive mechanism | Motor-driven eccentric |
| Applicable key types | Mechanical switches, tap switches, film switches, silicone rubber keys |
Accessories
(1) Custom test fixtures for different key sizes and shapes.
(2) Adjustable load weights.
(3) Digital counters for each test station.
(4) Multi-point testing heads for precise key contact.
Test Procedure
(1) Secure the key or keypad sample on the test station fixture.
(2) Set the desired test speed, stroke height, and load for each test head.
(3) Select the number of actuations for the test.
(4) Start the motor-driven test; each key is actuated according to the settings.
(5) Monitor digital counters to track the number of presses.
(6) Upon reaching the set number of actuations, stop the machine and evaluate the keys for wear, functional failure, or other defects.
(7) Record the data for quality control or product development purposes.
Maintenance Information
(1) Keep test heads and fixtures clean to prevent damage or contamination.
(2) Inspect and maintain motor and eccentric mechanism periodically.
(3) Verify calibration of test load and digital counters.
(4) Ensure power supply stability and check wiring connections regularly.
(5) Store the machine in a dry and dust-free environment.
Send product request
Other supplier products
 |
Computer-controlled Helmet Impact Tester | Application Scope This testing instrument is applicable to the impact - energy absorption performance test of helmets. It is used to evaluate the ... |
 |
Fiber Blend Ratio Test machine | Product Introduction: It is used to measure the resistance value with a certain density under a certain geometry, and then converts it into the sp... |
 |
Safety Helmet Impact Acceleration Tester | The safety helmet impact acceleration tester is an instrument used to test the performance of safety helmets when subjected to impact. It can simul... |
 |
Safety Helmet Impact Acceleration Tester | Purpose This instrument is suitable for impact - collision tests of helmets. It is a testing instrument used to evaluate the impact - resistance... |
 |
Rolling load tester | A common requirement for different types of indoor sports surfaces is the measurement of rolling load. A rolling load tester is used to test the ro... |
Same products
 |
Air Permeability Tester STD- F8 | Seller: Standard International Group (HK) Limited | The Air Permeability Tester is designed to quickly and accurately measure the breathability and p... |
 |
Surface Performance Tester STD-FB4 - A | Seller: Standard International Group (HK) Limited | Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti... |
 |
Compression Tester STD - FB3 - A | Seller: Standard International Group (HK) Limited | TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar... |
 |
Single - Strand Bending Tester STD - FB2 - SH | Seller: Standard International Group (HK) Limited | Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ... |
 |
Bending Tester STD- FB2 - S | Seller: Standard International Group (HK) Limited | Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig... |
