Medical injection needle puncture force tester

The Medical Injection Needle Puncture Force Tester is a precision instrument designed to evaluate the puncture performance of medical needles. It simulates skin penetration and measures the maximum puncture force, providing reliable data for quality control, research, and production verification. Equipped with a 5.7-inch LCD touch screen, the device offers real-time force/displacement display, automatic data recording, and printing capability for accurate and repeatable measurements.

Application

This tester is suitable for a wide range of medical needle testing scenarios, including:

(1) Disposable medical injection needles – assessing sharpness and penetration performance.

(2) Insulin pen needles – evaluating puncture consistency and patient comfort.

(3) Blood collection needles (Vacutainer) – ensuring safe and reliable blood sampling.

(4) IV infusion needles and cannulas – testing ease of insertion and mechanical performance.

(5) Specialty surgical needles – evaluating microsurgical and orthopedic needle performance.

(6) Veterinary injection needles – verifying puncture efficiency and safety.

(7) Cosmetic or aesthetic needles – assessing penetration force and consistency.

Standards

The instrument complies with domestic and international standards for medical needle testing:

(1) GB15811-2016: Disposable sterile injection needles (China)

(2) ISO 17025: General requirements for the competence of testing and calibration laboratories (International)

(3) EN ISO 7864: Sterile hypodermic needles for single use (International)

(4) ASTM F2878-12: Standard Test Method for Puncture Resistance of Medical Needles (International)

Features

(1) Real-time display of puncture force and peak force for precise evaluation.

(2) 5.7-inch LCD touch screen with intuitive menu for simplified operation.

(3) Automatic data recording, printing, and analysis, including average force and deviation.

(4) Supports a wide range of needle diameters (0.3–1.2 mm) and wall thicknesses.

(5) Compact, portable, and lightweight, suitable for laboratory and production environments.

(6) Accurate simulated skin testing, compliant with GB15811 standards.

(7) Continuous software upgrade capability to align with updated national and international standards.

Parameters

Parameter	Specification
Nominal needle specification	0.3 – 1.2 mm
Test range	0.10 – 5.00 N, accuracy ±0.01 N
Moving speed	100 mm/min
Simulated skin material	Polyurethane membrane, compliant with GB15811
Display	5.7-inch LCD touch screen (120 × 90 mm)
Data output	Printable: 8, 13, or 20 tests per batch; average force and deviation
Net weight	11 kg
Dimensions (L × W × H)	400 × 290 × 240 mm
Standards	GB15811-2016, ISO 17025, EN ISO 7864, ASTM F2878-12
Upgrade	Free upgrade according to national standards

Accessories

(1) Main unit – 1 set

(2) Printing paper – 1 roll

(3) Needle clamp fixture – 1 set

(4) Weight set – 1 set

(5) Operating instructions – 1 set

(6) One-year warranty

(7) Free perpetual upgrade service according to national standards

Test Procedures

(1) Condition the needle and simulated skin at 22°C ± 2°C for at least 24 hours.

(2) Clamp the simulated skin in the fixture, ensuring no stretching or compression.

(3) Mount the needle perpendicular to the surface of the simulated skin, tip centered on the puncture zone.

(4) Set the device moving speed to 100 mm/min.

(5) Start the test. The instrument records maximum puncture force and force/displacement curve in real time.

(6) Print or save test data for analysis, including peak force, F5 peak force, and average deviation.

Maintenance Information

(1) Keep the device and simulated skin clean and free from dust.

(2) Inspect clamps and simulated skin regularly for wear or damage.

(3) Calibrate the force sensor periodically to maintain accuracy.

(4) Store the instrument in a dry, temperature-stable environment.

(5) Follow local electrical safety regulations for proper grounding and operation.

Other supplier products

	Abrasive Wear Testing Machine	Standard ASTM G65 - 04 GB/T 3960-1983 Main Purposes The wet - type rubber wheel abrasive wear testing machine is primarily employed to assess t...
	Coating thickness gauge/film thickness gauge	Standard Coating Thickness Gauge complies with international standards includingASTM B499,ASTM D1400,ISO 2178,ISO 2360, andGB/T 4956, ensuring rel...
	Sliding Bearing Fatigue Test device	Standards ASTM D2596 / ASTM D2783 / IP 239 EP, DIN 51350 / 1-5. ISO / CD 11008. VW 1444. VW 1454 Material Research and Development During the re...
	Safety Helmet Roll-off Testing Equipment	Purpose Apply an initial load of a certain force to the rear of the helmet. Then, let a weight specified by the standard fall from a certain heigh...
	Femoral Stem Neck Prostheses Fatigue Tester	Standard YY/T 0809.6 (China): Specifies neck fatigue testing for femoral stems in partial/total hip arthroplasty. ISO 7206-6 (International): Def...

All supplier products

Same products

	Full-Body Garment Stress Tester,FZ/T 70015	Seller: Standard International Group (HK) Limited	TheFull-Body Garment Stress Testeris a precision instrument designed to quantify the pressure exe...
	Industrial Dry Cleaning Machine,industrial garment steamer	Seller: Standard International Group (HK) Limited	TheIndustrial Dry Cleaning and Energy-Saving Dryer Machinesare designed for high-performance, rel...
	MST Medical Compression Stocking Tester,compression sock tester	Seller: Standard International Group (HK) Limited	The MST Medical Compression Stocking Tester is a professional instrument designed to evaluate the...
	MMT Liquid Water Separation Tester,MMT Liquid Water Analysis Tool	Seller: Standard International Group (HK) Limited	Applications Textile Manufacturing:Testing waterproof fabrics for outdoor gear R&D:Developi...
	Dental material color stability tester	Seller: Standard International Group (HK) Limited	Application The applications of color stability testers for dental materials are mainly reflecte...