Syringe Sealing Positive Pressure Tester

The Syringe Sealing Positive Pressure Tester is a precision instrument designed to evaluate the tight-fitting performance of disposable syringes. It uses a combination of intelligent manipulator, force measurement system, and distance measurement mechanism to accurately detect potential leakage under positive and negative pressure conditions. The device ensures compliance with syringe sealing standards and supports quality control and R&D applications in medical device production.

Application

This tester is suitable for evaluating a wide range of medical devices with Luer-type and non-Luer connections, including:

(1) Disposable syringes of various capacities (1–200 mL) – testing piston and barrel sealing integrity.

(2) Infusion and injection systems – verifying leakage under positive and negative pressure conditions.

(3) Catheters – ensuring connection sealing under axial and lateral forces.

(4) Blood transfusion sets – testing reliability of sealing components under pressurized conditions.

(5) Production line quality control – confirming consistent tight-fitting performance across batches.

(6) Research and development – assessing new syringe and piston designs for leak prevention.

Standards

The tester complies with the following domestic and international standards:

(1) GB/T 15810-2001: Disposable sterile syringes (China)

(2) YY/T 0909-2013: Standard for disposable medical syringes (China)

(3) ISO 7886-1: Sterile hypodermic syringes for single use – Part 1: Syringes for manual use (International)

(4) ISO 7886-2: Sterile hypodermic syringes – Part 2: Syringes for use with injectors (International)

Features

(1) Intelligent manipulator with CPU, motherboard, LCD display, and keyboard control.

(2) Force measurement and distance monitoring for precise evaluation.

(3) Supports both positive and negative pressure tests.

(4) Adjustable lateral force, axial pressure, nominal capacity, and test time.

(5) Real-time monitoring and reporting, suitable for both laboratory and production environments.

(6) User-friendly interface for easy parameter setup and test execution.

Parameters

Parameter	Specification
Lateral force	0.25 – 3.00 N, error ≤ ±0.5%
Axial pressure	100 – 400 kPa, error ≤ ±2%
Nominal capacity	1 – 200 mL (optional)
Test time	0 – 9999 s, adjustable
Working temperature	5 – 40 ℃
Relative humidity	45 – 80%
Standards compliance	GB/T 15810-2001, YY/T 0909-2013, ISO 7886-1, ISO 7886-2

Accessories

(1) Intelligent manipulator – 1 set

(2) Force measurement mechanism – 1 set

(3) Distance measuring group – 1 set

(4) Printer – 1 set

(5) Operation manual – 1 set

(6) Power cable – 1 set

Test Procedures

(1) Fill the syringe with nominal water volume.

(2) Apply specified axial pressure and lateral force on the piston for 30 seconds; ensure no leakage between piston and barrel.

(3) Apply 88 kPa negative pressure for 60 ± 5 seconds; ensure no air leakage and the piston remains securely engaged with the plunger rod.

(4) Monitor the readings and record results for quality assessment.

(5) Adjust parameters as needed for different syringe sizes and capacities.

Maintenance Information

(1) Keep the device clean and free from water and dust contamination.

(2) Inspect manipulators and force sensors regularly for wear or damage.

(3) Calibrate pressure and force sensors periodically to maintain test accuracy.

(4) Store in a dry and stable environment.

(5) Follow electrical safety precautions during operation.

Other supplier products

	Rolling load tester	A common requirement for different types of indoor sports surfaces is the measurement of rolling load. A rolling load tester is used to test the ro...
	Hot Tack Tester / Heat Seal Tester	The Hot Tack Tester/Heat Seal Tester is specifically designed for testing the heat-adhesion and heat-sealing properties of packaging materials such...
	Rubber Sleeve Rebound Tester	The Rubber Sleeve Rebound Tester is designed to evaluate the resilience and compression performance of collection needle rubber sleeves. It measure...
	Qinsun Xenotest 220	Standards ISO 105-B02: Lightfastness testing for colored textiles. AATCC TM16 (Option 3): Accelerated weathering for textiles under controlled co...
	Metal Wire Wrap Tester	The Metal Wire Wrap Tester is designed to evaluate the ductility and winding performance of metallic wires. It measures the ability of wires to wit...

All supplier products

Same products

	Air Permeability Tester STD- F8	Seller: Standard International Group (HK) Limited	The Air Permeability Tester is designed to quickly and accurately measure the breathability and p...
	Surface Performance Tester STD-FB4 - A	Seller: Standard International Group (HK) Limited	Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti...
	Compression Tester STD - FB3 - A	Seller: Standard International Group (HK) Limited	TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar...
	Single - Strand Bending Tester STD - FB2 - SH	Seller: Standard International Group (HK) Limited	Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ...
	Bending Tester STD- FB2 - S	Seller: Standard International Group (HK) Limited	Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig...