Stain resistance tester for architectural coatings
Product Introduction
The interior wall coating in architectural coatings is often polluted by some pollution from daily necessities, people often use some neutral detergent to scrub the coating to remove stains, so the coating with good stain resistance is more and more popular.
Architectural coating stain resistance tester is designed and manufactured according to the latest national standard GB/T9780-2013 "Architectural coating stain resistance test method" : The coating stain resistance is evaluated by removing film stain removal rate, using stains as pollution sources, and attached to the coating test board by dip cleaning method or scrape coating method. The pollution resistance test is carried out with specified loads and times. The stain resistance of coated and coated test plates was evaluated by measuring the change of reflection coefficient before and after the test.
This instrument is mainly used to evaluate the antifouling ability of building interior wall coatings after adhesion to primary domestic pollution and scrubbing with neutral detergent. The main purpose is to evaluate the ability of building paint department to resist common domestic pollution. At the same time, the setting and counting of the number of scrubbing resistance of the instrument are displayed by the LCD screen, so that the whole test process is clearer and the operator is more convenient.
standards
GB/T 9780-2005
ASTM D 3450
ASTM D 4213
ASTM D 4828
ASTM D 7835-19
DIN EN 13300
Technical parameters
Friction head (including weight) weight :1500±109
Friction speed :10——99 times/min (any setting)
Friction stroke :300mm
Friction times :0——99999 times (any setting)
Input voltage: AC 220V50Hz
Test plate size: black PVC plastic sheet, size :432mmx165mmx0.25mm
Overall dimensions :590mmx460mmx300mm
Net weight :30 KG
Send product request
Other supplier products
 |
Femoral Stem Neck Prostheses Fatigue Testing Machine | Standard YY/T 0809.6 (China): Specifies neck fatigue testing for femoral stems in partial/total hip arthroplasty. ISO 7206-6 (International): Def... |
 |
Contact Lens Luminous Transmittance Analyzer | The Contact Lens Luminous Transmittance Analyzer is a precision instrument designed to measure the spectral transmittance of soft and hard contact ... |
 |
Surface Flammability Tester丨Surface Flammability Test mechine | Standards 1. GB/T 8745-2001《textile Combustion performance fabric surface burning time measurement》 2. ISO 10047:1993《textile fabric surface burn... |
 |
Spray Rating Tester丨Spray Rating Test Machine | Standards: ISO 4920. BS EN 24920. BS 3702. GB/T 4745. AATCC 22. M&S P23. NEXT 23 Applications: Spray Rating Tester is used to determine the ... |
 |
Glove Cut Resistance Tester | Product Introduction: The machine is used to test the cutting resistance of gloves. Under the specified load, the blade cuts the sample to measure... |
Same products
 |
Air Permeability Tester STD- F8 | Seller: Standard International Group (HK) Limited | The Air Permeability Tester is designed to quickly and accurately measure the breathability and p... |
 |
Surface Performance Tester STD-FB4 - A | Seller: Standard International Group (HK) Limited | Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti... |
 |
Compression Tester STD - FB3 - A | Seller: Standard International Group (HK) Limited | TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar... |
 |
Single - Strand Bending Tester STD - FB2 - SH | Seller: Standard International Group (HK) Limited | Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ... |
 |
Bending Tester STD- FB2 - S | Seller: Standard International Group (HK) Limited | Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig... |
