Mechanical Shock Test
Mechanical shock is the mechanical stress that a product often encounters during its life cycle. The impact on the product mainly depends on the product's instantaneous response to the shock. The shock response is affected by the magnitude and duration of the shock, as well as the inherent characteristics of the product itself. related. When the main frequency component of the impact is consistent with the natural frequency of the product, the damage to the product will increase.
Mechanical shock stress can cause structural deformation, loose installation, cracks or even breaks, and also loose electrical connections, poor contact, resulting in intermittent disconnection, and unstable product operation.
Mechanical Shock and Vibe TestingCapability Of ORT
Waveform type: half sine wave, rear sawtooth wave, trapezoidal wave.
Impact peak acceleration: ≤2000g
Pulse duration: ≤35ms
Applicable standards: IEC 60068-2-27, GB/T 2423.5, MIL-STD-810H, MIL-STD-883K, MIL-STD-202G, GJB 150A, GJB 1032, GJB 360B, GJB 548B, YD/T 2379, ETSI 300 019-2, GR-63, GR-487, etc.
If you want to needs to know more details of vibration resistance test, please visit our website.
As one of testing inspection and certification companies, we have types of reliability testfor sale, if you have needs, please contact us.
Send product request
Other supplier products
 |
LOW TEMPERATURE TEST | Low temperature test: The temperature during the test is not changed under a certain fixed temperature condition, depending on the actual use envir... |
 |
China ROHS | China RoHS is based on the "Announcement of the Ministry of Industry and Information Technology of the State Administration for Market Regulation o... |
 |
China ROHS | China RoHSis based on the "Announcement of the Ministry of Industry and Information Technology of the State Administration for Market Regulation on... |
 |
Metal Halide Lamp Test | The metal halide lamp is a gas discharge light source that can provide a spectral energy distribution similar to that of direct radiation and scatt... |
 |
CQC Certification | CCCCQCis the English abbreviation of China Quality Certification Center. The certificate is issued by the China Quality Certification Center CQC (t... |
Same products
 |
Good Quality Manufacturer XP-607 Professional Trinocular Polarizing microscope | Seller: Ningbo HuaSheng Precision Technology Co.,Ltd | XP-607LP Transmission & Reflection polarizing microscope is a professional laboratory instrum... |
 |
Steam Aging Test Chamber Of Structure, Installation And Operation | Seller: Guangdong Yuanyao Test Equipment Co.,Ltd. | Steam aging test is applicable to electronic connectors, semiconductor ICs, transistors, diodes, ... |
 |
OTA Amplitude And Phase Calibration Test System | Seller: Hangzhou Yonghe Technology Co., Ltd | OTA Amplitude And Phase RF Calibration TestSystem Active phased array rf antennais composed of... |
|
|
Mechanical Shock Test | Seller: Shen Zhen ORT Technical Service Co.,Ltd | Mechanical shock is the mechanical stress that a product often encounters during its life cycle. ... |
 |
Low Temperature Test | Seller: Shen Zhen ORT Technical Service Co.,Ltd | Low temperature test: The temperature during the test is not changed under a certain fixed temper... |
