.

BBA steady state solar simulator tester

Standard

  • IEC 61215: Terrestrial Photovoltaic (PV) Modules – Design Qualification and Type Approval
  • IEC 61646: Thin-Film Terrestrial Photovoltaic (PV) Modules – Design Qualification and Type Approval
  • ISO 9060: Solar Energy – Classification of Pyranometers
  • CE Certification(Conformité Européenne)

Product Advantages

  1. BBA-Grade Performance
    • Class B Spectral Matching: Ensures AM1.5G compliance for accurate energy rating.
    • Grade B Irradiance Uniformity: <5% deviation across 2.0m × 1.0m test area.
  2. Multi-Mode Testing
    • STC/NOCT/Hotspot Simulation: Replicates standard test conditions, nominal operating cell temperature, and thermal runaway scenarios.
    • 1,000 W/m² Tuneability: Adjustable irradiance for low-light performance mapping.
  3. Stability First
    • Class A Transient Stability: <2% flicker during pulsed load testing.
    • Metal Halide Lamp Longevity: 5,000-hour lifespan with <10% lumen depreciation.
  4. Smart Control
    • AI-Powered Irradiance Correction: Compensates for lamp aging in real-time.
    • Remote Calibration: Wi-Fi/Ethernet connectivity for ISO 17025 compliance.
  5. Safety First
    • UV Filter: Blocks harmful UVC radiation during operator access.
    • Emergency Shutoff: Dual redundant safety circuits with GPS-enabled alerts.

Product Features

  • 2.0m × 1.0m Test Area: Accommodates full-size 72-cell modules and small BIPV panels.
  • 6-Axis Robotic Arm: Automates IV curve tracing and EL imaging positions.
  • 10” Sunlight-Readable HMI: Preloaded IEC 61215/61646 test sequences with customizable dwell times.
  • Self-Cleaning System: Automated lamp housing purging for dust-free operation.
  • Modular Design: Expandable from 1 kW to 10 kW for pilot-scale production lines.

Technical Parameters

ParameterSpecification
Irradiance Range 200–1,200 W/m² (AM1.5G filtered)
Spectral Matching Class B (IEC 60904-9)
Uniformity Grade B (<5% deviation)
Stability Class A (<2% transient flicker)
Lamp Type Metal Halide (400 nm–1,100 nm output)
Test Area 2,000mm (W) × 1,000mm (D)
Power Supply 380V/415V 3-phase, 50/60Hz
Dimensions 2,500mm (W) × 1,500mm (D) × 2,200mm (H)
Weight 1,800 kg (net) / 2,500 kg (gross)

Accessories Included

  1. Testing Kit:
    • 4x PV module test fixtures (adjustable for frameless/framed modules).
    • 10x Type T thermocouples with ceramic insulation.
  2. Software Suite:
    • License key forSolarSim Pro(Windows/Linux).
    • 1-year free access to cloud-based PV simulation tools.
  3. Calibration & Safety:
    • NIST-traceable irradiance meter.
    • UV safety goggles (Class 1, 3 pairs).
  4. Maintenance Kit:
    • Spare metal halide lamps and igniters.
    • Lamp cleaning solution (non-corrosive).
  5. Documentation:
    • Multilingual quick-start guide (printed + digital).
    • Compliance certificates for IEC/UL/ISO standards.

Send product request

To: Qinsun Instruments Co., LTD
Your E-mail:
Message text:


Send to other suppliers

Other supplier products

Medical Face Mask Differential Pressure meter
Medical Face Mask Differential Pressure meter Medical face mask differential pressure tester also called mask breathility tester is to determine the breathability of medical face mask materials...
Solid electrolyte analysis device
Solid electrolyte analysis device Standard ISO 9001:2015(Quality Management System) ASTM E1970-21(Standard Guide for Electrochemical Impedance Spectroscopy) IEC 62660-2(Secondary...
Thrust Washer Friction Testing Machine
Thrust Washer Friction Testing Machine Applicable standards When the end face rotary friction and wear testing machine is tested, it is usually necessary to follow certain standards and...
Enamel Boiling Water Mass Loss Tester
Enamel Boiling Water Mass Loss Tester Product Introduction: The enamel layer boiling water weight loss tester is designed according to QB/T 2590-2003 Appendix A, GBT99892-2015 /ISO 287...
Glove Cut Resistance Tester
Glove Cut Resistance Tester Product Introduction: The machine is used to test the cutting resistance of gloves. Under the specified load, the blade cuts the sample to measure...
All supplier products

Same products

Full-Body Garment Stress Tester,FZ/T 70015
Full-Body Garment Stress Tester,FZ/T 70015 Seller: Standard International Group (HK) Limited Whats/App: +86 156 1874 6768 Web: standard-groups.com TheFull-Body Garment Stress Testeris a pr...
Industrial Dry Cleaning Machine,industrial garment steamer
Industrial Dry Cleaning Machine,industrial garment steamer Seller: Standard International Group (HK) Limited Whats/App: +86 156 1874 6768 Web: standard-groups.com TheIndustrial Dry Cleaning and Energy-Sav...
MST Medical Compression Stocking Tester,compression sock tester
MST Medical Compression Stocking Tester,compression sock tester Seller: Standard International Group (HK) Limited Whats/App: +86 156 1874 6768 Web: standard-groups.com The MST Medical Compression Stocking Test...
MMT Liquid Water Separation Tester,MMT Liquid Water Analysis Tool
MMT Liquid Water Separation Tester,MMT Liquid Water Analysis Tool Seller: Standard International Group (HK) Limited Whats/App: +86 156 1874 6768 Web: standard-groups.com Applications Textile Manufacturing:Testi...
Dental material color stability tester
Dental material color stability tester Seller: Standard International Group (HK) Limited Whats/App: +86 156 1874 6768 Web: standard-groups.com Application The applications of color st...