" Helmet Goggles High Speed Particle Impact Testing Machine"
Main Purpose
To test the impact - resistance performance of glasses, goggles and face shields at a certain speed.
Applicable Standards
SNELL SA/K2010
EN 166. EN 168
ANSI Z87.1. MIL - PRF - 32432
ISO 4855
Technical Parameters
1. quality 1g ± 0.1g; diameter 5.5mm ± 0.1mm
2. impact speed: 140~170m/s (adjustable);
3. the control panel has an emergency stop device, higher safety; digital LCD display, display the speed of the projectile (m/s);
4. the test bench has an adjustable device. Convenient for quick and easy installation of helmets;
5. high-speed speed measurement system, the use of advanced high-precision laser speed monitor;
6. the normal operation of the machine needs to be connected with an air compressor. Provide high-pressure gas original with high-precision valve, so that instantly reach the test speed;
7. equipped with a safety police display light, when the door and valve of the equipment is not closed when the equipment can not enter the test state;
8. the instrument operated by the air, the test space for the fully enclosed, the door is installed on the observation port.
Send product request
Other supplier products
 |
Protective Clothing Synthetic Blood Penetration Resistance Tester | Introduction It is applicable to the resistance of the protective clothing to the synthetic blood penetration under different levels of test pressu... |
 |
Spray Rating Tester | Testing Standards: ISO 4920, BS EN 24920, BS 3702, GB/T 4745, AATCC 22, M&S P23, NEXT 23 Applications: Spray Rating Tester is used to determine... |
 |
Closed - Space Tester for Aerosol Sprays | Product Description Conforms to UN Recommendations on the Transportation of Dangerous Goods - Manual of Tests and Criteria 31.5 Confined Space Ign... |
 |
Carton drop tester | Product introduction It is mainly used to simulate the impact of the drop impact on the packaging during transportation and loading and unloa... |
 |
Particle Abrasion Tester | The Q-4D particle wear tester is specially designed as a standard instrument based on the national standard "Method for Determination of Wear Rate ... |
Same products
 |
Gas Oxidizing Property Tester | Seller: Standard International Group (HK) Limited | Product Description Conforms to ISO 10156-2010 “Gases and Gas Mixtures Selection of Cylind... |
 |
Battery Powder Compaction Density Measurement System | Seller: Standard International Group (HK) Limited | The Battery Powder Compaction Density Measurement System is a precision testing system designed... |
 |
Battery Powder resistance tester | Seller: Standard International Group (HK) Limited | The Powder Resistivity Meter is a precision testing system designed to measure electrical resisti... |
 |
KES-SESRU surface roughness/friction tester | Seller: Standard International Group (HK) Limited | TheRoughness/Friction Tester analyzes hand movements-particularly, strokes-performed by artisans ... |
 |
Air Permeability Tester STD- F8 | Seller: Standard International Group (HK) Limited | The Air Permeability Tester is designed to quickly and accurately measure the breathability and p... |
