Vacuum Ball - Disk Friction Tester
Main Purposes of Vacuum Ball - Disk Friction Tester
The vacuum ball - disk friction tester is a device specifically used for evaluating the sliding friction coefficient of point contact and the wear life of materials under vacuum and different atmospheric environment conditions. Its main purposes include:
Material Friction Performance Evaluation
- Simulate the actual friction conditions of materials in a vacuum or specific atmospheric environment, test the friction coefficient of materials, and evaluate their friction performance. - Test the friction behavior of materials under different loads and speeds to obtain friction performance data, providing a basis for material research, development, and optimization.
Wear Life Testing
- Calculate the wear life of materials by measuring the friction and wear conditions when the ball specimen rotates on the disk specimen. - Evaluate the performance changes of materials during long - term friction and wear processes, providing support for the assessment of material reliability and durability.
En
- Friction tests can be carried out in a vacuum environment to simulate the friction behavior in special application scenarios such as space and the nuclear industry.
- By adjusting the atmospheric environment, such as argon, nitrogen, etc., study the influence of different atmospheres on the friction performance of materials.
Lubricating Film Performance Evaluation
- For lubricating film materials, their wear life can be evaluated by testing the number of rotations before lubrication failure.
- Study the friction performance of lubricating films under different conditions to provide support for the research, development, and optimization of lubricants.
When the vacuum ball - disk friction tester conducts tests, it may need to comply with the following relevant standards or specifications (the specific standards may vary depending on the instrument model and application field):
Material Performance Testing Standards
Performance testing standards for specific material types, such as metallic materials, polymer materials, ceramic materials, etc.
Vacuum Environment Testing Standards
Such as standards and specifications regarding vacuum degree control and atmospheric environment simulation.
Technical parameters:
Test standard: ASTM G99 G133 G59 G102 G119
Load: 0.25-200N
Speed: 0.1-3000rpm
Friction: 100N
Size: 650mm*400mm*700mm
Weight: 80KG
Power supply: 220V/50Hz
Send product request
Other supplier products
 |
Non-combustibility Tester | Product details Non-combustible material refers to the material when it is heated by the fire even if it become the red or melting, which will not... |
 |
Fully Automatic Stripping Machine for Automotive Wires | The fully automatic stripping machine for automotive wires complies with the standards of GB/T2951 - 2008 and IEC60811 *General Test Methods for In... |
 |
Dynamic Shoe Waterproof Bending Tester | Product Introduction: It is used to test the dynamic waterproof performance of various finished shoes, and the number of times when no water enter... |
 |
Rubber Mooney viscometer | Test principle: The Mooney viscometer is used to measure the viscosity of rubber under specific conditions. In the test, the rubber sample was loa... |
 |
AC/DC High - Voltage Testing Machine for Automotive Wires | Standards ISO 6722, ISO 14572: International standards for automotive cables and electrical continuity. IEC 60529: IP code compliance for dust/... |
Same products
 |
Gas Oxidizing Property Tester | Seller: Standard International Group (HK) Limited | Product Description Conforms to ISO 10156-2010 “Gases and Gas Mixtures Selection of Cylind... |
 |
Battery Powder Compaction Density Measurement System | Seller: Standard International Group (HK) Limited | The Battery Powder Compaction Density Measurement System is a precision testing system designed... |
 |
Battery Powder resistance tester | Seller: Standard International Group (HK) Limited | The Powder Resistivity Meter is a precision testing system designed to measure electrical resisti... |
 |
KES-SESRU surface roughness/friction tester | Seller: Standard International Group (HK) Limited | TheRoughness/Friction Tester analyzes hand movements-particularly, strokes-performed by artisans ... |
 |
Air Permeability Tester STD- F8 | Seller: Standard International Group (HK) Limited | The Air Permeability Tester is designed to quickly and accurately measure the breathability and p... |
