Vacuum Ball - Disk Friction Tester

• 

Main Purposes of Vacuum Ball - Disk Friction Tester

The vacuum ball - disk friction tester is a device specifically used for evaluating the sliding friction coefficient of point contact and the wear life of materials under vacuum and different atmospheric environment conditions. Its main purposes include:

Material Friction Performance Evaluation

- Simulate the actual friction conditions of materials in a vacuum or specific atmospheric environment, test the friction coefficient of materials, and evaluate their friction performance. - Test the friction behavior of materials under different loads and speeds to obtain friction performance data, providing a basis for material research, development, and optimization.

Wear Life Testing

- Calculate the wear life of materials by measuring the friction and wear conditions when the ball specimen rotates on the disk specimen. - Evaluate the performance changes of materials during long - term friction and wear processes, providing support for the assessment of material reliability and durability.

En

- Friction tests can be carried out in a vacuum environment to simulate the friction behavior in special application scenarios such as space and the nuclear industry.

- By adjusting the atmospheric environment, such as argon, nitrogen, etc., study the influence of different atmospheres on the friction performance of materials.

Lubricating Film Performance Evaluation

- For lubricating film materials, their wear life can be evaluated by testing the number of rotations before lubrication failure.

- Study the friction performance of lubricating films under different conditions to provide support for the research, development, and optimization of lubricants.

When the vacuum ball - disk friction tester conducts tests, it may need to comply with the following relevant standards or specifications (the specific standards may vary depending on the instrument model and application field):

Material Performance Testing Standards

Performance testing standards for specific material types, such as metallic materials, polymer materials, ceramic materials, etc.

Vacuum Environment Testing Standards

Such as standards and specifications regarding vacuum degree control and atmospheric environment simulation.

Technical parameters:

Test standard: ASTM G99 G133 G59 G102 G119

Load: 0.25-200N

Speed: 0.1-3000rpm

Friction: 100N

Size: 650mm*400mm*700mm

Weight: 80KG

Power supply: 220V/50Hz

Другие товары поставщика

	Paper quantitative tester	Product Introduction: The circular square quantitative sampler （referred to as quantitative sampler） is a special sampler for the quantitative det...
	Needle Flame Test Machine, IEC60695-2-2	Introduction TESTECH Needle Flame Tester is in accordance with national standards IEC60695-2-2 and IEC60695-11-5to design andproduce.Thetester app...
	Smoke Density Test Machine for Building Material, ASTM D2843	Introduction: In a fire, people are often smoke suffocated or unable to escape because of the invisible road, so in the prevention of fires,smoke ...
	Diaper Anti-Side Leakage Performance Tester	Meet the standard: Compliant with GB: GB/T 28004.1 Diapers Part 1: Baby Diapers. GB/T 28004.2-2021 Disposable diapers—Part 2:Disposable dia...
	SBI Single Burning Item	Introduction Single burning instrument (SBI) was measured supplies (excluding floorings) performance at a single burning heat invasion conditions....

Похожие товары

	Full-Body Garment Stress Tester,FZ/T 70015	Продавец: Standard International Group (HK) Limited	TheFull-Body Garment Stress Testeris a precision instrument designed to quantify the pressure exe...
	Industrial Dry Cleaning Machine,industrial garment steamer	Продавец: Standard International Group (HK) Limited	TheIndustrial Dry Cleaning and Energy-Saving Dryer Machinesare designed for high-performance, rel...
	MST Medical Compression Stocking Tester,compression sock tester	Продавец: Standard International Group (HK) Limited	The MST Medical Compression Stocking Tester is a professional instrument designed to evaluate the...
	MMT Liquid Water Separation Tester,MMT Liquid Water Analysis Tool	Продавец: Standard International Group (HK) Limited	Applications Textile Manufacturing:Testing waterproof fabrics for outdoor gear R&D:Developi...
	Dental material color stability tester	Продавец: Standard International Group (HK) Limited	Application The applications of color stability testers for dental materials are mainly reflecte...