Rupture strength tester

Standard

IEC 61730-2: Photovoltaic (PV) Module Safety Qualification – Requirements for Testing

UL 61730: Safety Standard for Photovoltaic Modules

CE Certification(Conformité Européenne)

Product Advantages

Ultra-Wide Pressure Range

250–5.600 kPa (36–812 psi): Tests glass, backsheets, and encapsulants from thin-film to dual-glass modules.

0.01 kg/cm² Resolution: Captures micro-fractures before catastrophic failure.

Precision Engineering

5 kg/cm² Adjustable Holding Pressure: Simulates wind/snow loads per IEC 61730-2.

Multi-Unit Display: Switches between kPa, psi, and kg/cm² for global compliance.

Safety First

Dual Overpressure Protection: Mechanical relief valve + electronic cutoff at 5.600 kPa.

Explosion-Proof Chamber: Reinforced acrylic window for safe failure observation.

User-Centric Design

7” Touchscreen HMI: Preloaded IEC/UL test sequences with auto-hold functions.

Voice-Guided Setup: Step-by-step audio prompts for operators.

Data Integrity

Built-In Printer: Generates ISO 17025-compliant test certificates on-site.

SD Card Logging: Exports pressure-time curves for R&D analysis.

Product Features

Quick-Change Fixtures: Adapts to 2–20 mm module thicknesses.

Dynamic Pressure Control: Ramp rates from 1 kPa/s to 100 kPa/s.

Self-Calibrating System: Auto-tare and linearity checks before each test.

Rust-Resistant Frame: 304 stainless steel construction with epoxy coating.

Portable Design: 60 kg weight with integrated handles for lab-to-line mobility.

Accessories Included

Testing Kit:

1x Specialized Clamping Fixture (for 2–20 mm modules).

2x High-Temperature Rubber Membranes (300°C rated).

5x Aluminum Foil Calibration Discs.

Consumables:

1x 85% Glycerin Solution Bottle (for hydraulic calibration).

10x Disposable Dust Filters.

Documentation:

Multilingual Quick-Start Guide (printed + digital).

Compliance Certificates for IEC/UL Standards.

Safety Gear:

2x Safety Goggles (ANSI Z87.1 rated).

1x Emergency Pressure Release Key.

Technical Parameters

Parameter	Specification
Pressure Range	250–5.600 kPa (36–812 psi)
Resolution	0.01 kg/cm² (1.42 psi)
Holding Pressure	5 kg/cm² (71 psi) adjustable
Air Source	6 kg/cm² (87 psi) min (customer-provided)
Control Accuracy	±1% FS (full scale)
Power Supply	220V AC, 50/60Hz (single-phase)
Dimensions	560mm (W) × 470mm (D) × 550mm (H)
Weight	60 kg (net)

Other supplier products

	Digital Pneumatic Stiffness Tester/Stiffness Tester Pneumatic	A plunger of 25.4 mm (1 in) diameter pushes the fabric through a 38 mm (1.5 in) diameter orifice for a distance of 57 mm (2.25 in) in 1.7 seconds...
	Four - point Bending Tester	Standard YY/T 0342-2022: Chinese standard specifying methods for determining bending strength and equivalent bending stiffness of straight and pre...
	Helmet Strap Tensile Tester	The helmet strap tensile testing machine is designed to simulate tensile, impact, and durability loads encountered in actual use, accurately evalua...
	Solid electrolyte analysis system	The Solid Electrolyte Analysis System is a precision testing platform designed to evaluate the ionic conductivity, electrochemical impedance, and i...
	UL94 Horizontal Vertical Flame Tester	Introduction Rubber horizontal vertical flame testeris designed to simulate the early firing situation of electronic and electrical products in ...

All supplier products

Same products

	Gas Oxidizing Property Tester	Seller: Standard International Group (HK) Limited	Product Description Conforms to ISO 10156-2010 “Gases and Gas Mixtures Selection of Cylind...
	Battery Powder Compaction Density Measurement System	Seller: Standard International Group (HK) Limited	The Battery Powder Compaction Density Measurement System is a precision testing system designed...
	Battery Powder resistance tester	Seller: Standard International Group (HK) Limited	The Powder Resistivity Meter is a precision testing system designed to measure electrical resisti...
	KES-SESRU surface roughness/friction tester	Seller: Standard International Group (HK) Limited	TheRoughness/Friction Tester analyzes hand movements-particularly, strokes-performed by artisans ...
	Air Permeability Tester STD- F8	Seller: Standard International Group (HK) Limited	The Air Permeability Tester is designed to quickly and accurately measure the breathability and p...