Nonwovens liquid loss tester
Product Overview
The Nonwovens Liquid Loss Tester is a precision instrument designed to evaluate the liquid penetration, slip, and loss performance of nonwoven fabric materials. It features a built-in liquid loss platform and sample fixture, enabling standardized testing of absorption and liquid retention characteristics, suitable for both R&D and production quality control.
Application
The tester is widely applicable across multiple industries:
(1) Hygiene products: diapers, adult incontinence products, sanitary pads
(2) Medical textiles: wound dressings, surgical gowns, masks
(3) Filtration materials: air filters, water filters, industrial wipes
(4) Food packaging: absorbent pads, protective liners
(5) Industrial absorbents: oil-absorbing mats, chemical spill pads
(6) Textiles and nonwoven R&D: evaluating new materials, coatings, and treatments
(7) Quality control laboratories: production batch testing, compliance verification
(8) Building and construction: moisture barrier textiles, insulation fabrics
(9) Automotive: cabin filters, absorbent mats, soundproofing layers
(10) Environmental engineering: spill control fabrics, eco-friendly absorbents
Standards
EDANA 152.0-99 (Absorbent Hygiene Products – Liquid Loss Test)
ISO 9073-11 (Textiles – Nonwovens – Determination of Liquid Loss)
Optional references for hygiene products: ASTM F2331, EN 13726-1
Features
(1) Equipped with standardized liquid loss platform and sample fixture to meet test requirements
(2) Integrated dosing device delivers 25 mL of test solution continuously within 4 ± 0.1 seconds
(3) Manual or automatic liquid dispensing, with digital display for accurate timing
(4) Optional weighing system to measure liquid absorption quantitatively
(5) Adjustable slope for controlled liquid flow over the sample
(6) High precision and repeatability for reliable quality control results
Test Principle
A standard absorbent medium is placed beneath the nonwoven sample, positioned on a sloping pad. A specified amount of test liquid is applied to the sample. The liquid penetrates the nonwoven and is absorbed by the medium. By measuring the mass of the absorbent medium before and after testing, the liquid loss performance of the nonwoven sample is calculated.
Technical Parameters
| Parameter | Specification |
|---|---|
| Flow Control Range | 6.10–6.41 mL/s |
| Slope Angle | 25° |
| Slip and Loss Length | 250 ± 0.2 mm |
| Timing | 60 s, ±0.1 s accuracy |
| Slip and Loss Weight | 30 g ± 0.01 g |
| Liquid Volume | 25 mL/test |
| Measurement Method | Gravimetric via absorbent medium |
Accessories
Standard sample fixture
Built-in dosing system
Optional weighing system
Digital display and timing module
Test Procedures / Maintenance
(1) Place the standard absorbent medium under the nonwoven sample.
(2) Mount the sample on the slope pad and secure with the fixture.
(3) Fill the dosing device with test liquid (e.g., artificial urine).
(4) Start the test: liquid is dispensed manually or automatically over 4 ± 0.1 s.
(5) Measure the mass of the absorbent medium before and after the test to calculate liquid loss.
(6) Clean the dosing system and sample fixture after each test to prevent residue buildup.
(7) Perform regular calibration checks for dosing volume and timing accuracy.
Send product request
Other supplier products
 |
UV Condensation Aging Test Chamber丨UV Condensation Aging Tester | Standard ASTM G154.ISO 4892-3.JIS K 7350. andSAE J2020for UV exposure testing. IEC 60068-2-78for condensation and humidity resistance evaluations... |
 |
Ignition Distance Measurer for Spray Aerosols | Product Description Conforms to UN Recommendations on the Transportation of Dangerous Goods - Manual of Tests and Criteria 31.4 Ignition Distance ... |
 |
UL1581 FCable Burning Test Chamber | Introduction: Wire and cable horizontal vertical combustion tester is designed and manufactured according to UL1581. The tester is used to carry o... |
 |
Resistance Tester for Molten Metal Droplet (Splash) Impact Performance | Performance and Standards: This resistance tester for molten metal droplet (splash) impact performance is developed in accordance with testing sta... |
 |
Sole heat resistance testing machine丨Sole heat resistance tester | Main uses: The sole heat resistance tester is used to test the heat resistance and temperature insulation performance of finished shoes under high... |
Same products
 |
Full-Body Garment Stress Tester,FZ/T 70015 | Seller: Standard International Group (HK) Limited | TheFull-Body Garment Stress Testeris a precision instrument designed to quantify the pressure exe... |
 |
Industrial Dry Cleaning Machine,industrial garment steamer | Seller: Standard International Group (HK) Limited | TheIndustrial Dry Cleaning and Energy-Saving Dryer Machinesare designed for high-performance, rel... |
 |
MST Medical Compression Stocking Tester,compression sock tester | Seller: Standard International Group (HK) Limited | The MST Medical Compression Stocking Tester is a professional instrument designed to evaluate the... |
 |
MMT Liquid Water Separation Tester,MMT Liquid Water Analysis Tool | Seller: Standard International Group (HK) Limited | Applications Textile Manufacturing:Testing waterproof fabrics for outdoor gear R&D:Developi... |
 |
Dental material color stability tester | Seller: Standard International Group (HK) Limited | Application The applications of color stability testers for dental materials are mainly reflecte... |
