UV Viewing Cabinet
The UV Viewing Cabinet is a precision instrument designed to detect and analyze fluorescent substances in a wide range of materials. By providing controlled ultraviolet (UV) and visible light exposure, it allows accurate observation, comparison, and documentation of fluorescence for quality control, impurity detection, and material authentication.
Application
(1) Coatings and paints: Detect and analyze phosphors in plastics, paints, and coatings.
(2) Aluminum foil: Examine fluorescent substances in aluminum foil and related materials.
(3) Paper: Test for fluorescent substances in various types of paper.
(4) Plastics: Detect fluorescence in plastics and other polymer materials.
(5) Quality control: Evaluate material uniformity and detect impurities.
(6) Research and development: Study fluorescent behavior of new compounds or coatings.
(7) Non-destructive testing: Examine samples without damaging or altering them.
Standards
(1) GB/T 16422.3 – Fluorescent inspection methods for non-metallic materials.
(2) GB/T 14522 – Material fluorescence testing standards.
(3) ASTM G154 – Standard practice for fluorescent testing of non-metallic materials.
(4) ISO 4892-3 – Plastics exposure to laboratory light sources for fluorescence testing.
(5) SAE J2020 – Automotive exterior parts fluorescence inspection.
Features
(1) Integrated UV light sources at 254 nm (short-wave) and 365 nm (long-wave) for excitation of different fluorescent compounds.
(2) D65 standard visible light source for comparison under controlled white light conditions.
(3) Camera system for capturing and documenting sample fluorescence images.
(4) Light-tight chamber for controlled environment and operator protection.
(5) UV filter (200×50 mm) to regulate emitted UV light.
(6) Host unit for centralized control and image analysis.
(7) Picture comparison function for side-by-side observation of samples under UV or visible light.
(8) Non-destructive testing, supporting quality control, impurity detection, and material authentication.
Parameters
| Parameter | Specification |
|---|---|
| Ultraviolet wavelength | 254 nm, 365 nm |
| Filter size | 200 × 50 mm |
| Visible light | D65 standard illuminant |
| Power supply | AC 220V, 50Hz |
| Standard configuration | Host unit, picture comparison system |
Accessories
(1) Host unit
(2) Camera system for image capture
(3) UV filters
(4) Picture comparison system
(5) Power cable and manual
Test Procedures
(1) Place the sample inside the UV Viewing Cabinet.
(2) Select the UV wavelength (254 nm or 365 nm) or the visible light source (D65) as required.
(3) Activate the light source and allow the sample to be illuminated under controlled conditions.
(4) Observe the fluorescence visually or capture images using the integrated camera system.
(5) Use the picture comparison function to analyze differences between samples or compare with reference standards.
(6) Record and document the observations for quality control or R&D purposes.
Maintenance Information
(1) Keep the chamber clean and free from dust or residues that may affect UV exposure.
(2) Inspect UV lamps and filters periodically for damage or reduced output.
(3) Handle the camera system carefully and avoid exposure to excessive UV light.
(4) Ensure all electrical connections are secure and the power supply is stable.
(5) Avoid direct eye exposure to UV light during operation.
(6) Follow manufacturer guidelines for servicing and lamp replacement.
Send product request
Other supplier products
 |
Solid electrolyte analysis system | The Solid Electrolyte Analysis System is a precision testing platform designed to evaluate the ionic conductivity, electrochemical impedance, and i... |
 |
Elastic Tape Fatigue Testing Machine | This instrument is used to test the elasticity of elastic belt after reciprocating movement. Application Elastic Tape Fatigue Testing Machineis u... |
 |
Automatic freezing point pour point cold tester | Product Introduction: The automatic freezing point pouring point Freezing point tester is suitable for petroleum, biological, chemical and other f... |
 |
STD IPX7 Machine Waterproof Test Chamber | Product Introduction Test the product waterproof performance in the soaking environment (water depth 1 meters). Through the test ,check whether t... |
 |
Spring Testers and Testing Machines | The Spring Tension and Compression Testing Machine is designed to accurately evaluate the tensile and compressive deformation, as well as the load ... |
Same products
 |
Gas Oxidizing Property Tester | Seller: Standard International Group (HK) Limited | Product Description Conforms to ISO 10156-2010 “Gases and Gas Mixtures Selection of Cylind... |
 |
Battery Powder Compaction Density Measurement System | Seller: Standard International Group (HK) Limited | The Battery Powder Compaction Density Measurement System is a precision testing system designed... |
 |
Battery Powder resistance tester | Seller: Standard International Group (HK) Limited | The Powder Resistivity Meter is a precision testing system designed to measure electrical resisti... |
 |
KES-SESRU surface roughness/friction tester | Seller: Standard International Group (HK) Limited | TheRoughness/Friction Tester analyzes hand movements-particularly, strokes-performed by artisans ... |
 |
Air Permeability Tester STD- F8 | Seller: Standard International Group (HK) Limited | The Air Permeability Tester is designed to quickly and accurately measure the breathability and p... |
