Appliance Stability Tester
The Appliance Stability Tester is designed to evaluate the mechanical stability and anti-tipping safety of household and similar electrical appliances when placed on an inclined supporting surface. By tilting the test platform to specified angles in accordance with international safety standards, the tester objectively determines whether an appliance will overturn under normal or foreseeable misuse conditions. It is an essential safety compliance instrument for appliance manufacturers, testing laboratories, and certification bodies.
Application
(1) Stability testing of large household appliances (refrigerators, freezers, washing machines, dryers)
(2) Stability assessment of kitchen appliances installed on floors or countertops (dishwashers, ovens, microwave ovens)
(3) Mechanical stability evaluation of air conditioners, dehumidifiers, and similar floor-standing appliances
(4) Safety testing of commercial and light industrial electrical appliances requiring surface operation
(5) Compliance testing during product certification, type testing, and factory quality control
(6) R&D evaluation of structural design and center-of-gravity optimization for new appliance models
Standards
(1) GB 4706.1 — Household and similar electrical appliances – Safety – Part 1: General requirements (Clause 20.1 Stability)
(2) IEC 60335-1 — Household and similar electrical appliances – Safety – Part 1: General requirements (Clause 20.1 Stability)
(3) EN 60335-1 — European adoption of IEC 60335-1 (Stability requirements)
(4) GB/T 21547-2008 — Safety requirements for household and similar electrical appliances (related stability clauses)
(5) UL 60335-1 — Safety of Household and Similar Electrical Appliances (stability-related requirements)
Features
(1) Fully compliant with major national and international appliance safety standards
(2) Adjustable tilt angle mechanism to accurately simulate standard-required inclination conditions
(3) Rigid and stable workbench capable of supporting heavy appliances
(4) Simple mechanical structure with intuitive operation
(5) Suitable for a wide range of appliance sizes and weights
(6) Enables objective and repeatable evaluation of tipping and sliding risks
Parameters
| Item | Description |
|---|---|
| Work surface | Flat workbench with integrated angle adjustment mechanism |
| Load capacity | ≤ 100 kg |
| Angle adjustment range | 0° – 15° (typical), higher angles optional |
| Angle accuracy | ±0.5° |
| Rotation function | Rotatable platform, adjustable speed |
| Vibration simulation | Frequency range 5 – 200 Hz (optional) |
| Measurement system | Force sensor and displacement measurement (optional) |
| Safety protection | Emergency stop button, anti-tipping brackets |
| Power supply | AC 220 V, 50 Hz (if motorized functions applied) |
Accessories
(1) Adjustable angle positioning mechanism
(2) Appliance fixing and anti-slip supports
(3) Safety protection guards and emergency stop device
(4) Optional vibration simulation and measurement modules
Test Procedures
(1) Place the appliance under test on the workbench in its normal operating position
(2) Adjust the platform orientation to the most unfavorable direction as specified by the relevant standard
(3) Gradually tilt the platform to the required test angle
(4) Observe whether the appliance tips, slides, or remains stable
(5) Record the test angle and stability behavior
(6) Repeat the test for all required orientations and configurations
Maintenance Information
(1) Regularly inspect the angle adjustment mechanism for smooth operation
(2) Keep the workbench surface clean and free from oil or debris
(3) Periodically verify angle accuracy using calibrated measuring tools
(4) Check safety guards, fasteners, and emergency stop function before testing
(5) Store the equipment in a dry environment to prevent corrosion and mechanical degradation
Send product request
Other supplier products
 |
Xenon Arc Weathering Instruments | Whats/App: +86 156 1874 6768 Web: standard-groups.com Introduction SI4000Xenon Arc Weather Ometer utilizes a xenon lamp to simulate ideal natura... |
 |
Medical Injection Needle Stiffness Measuring Device | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standard GB 18457-2001 This standard mandates precise control over needle wall thickness ... |
 |
Smoke Toxicity Test Equipment for Navy Engineering | Whats/App: +86 156 1874 6768 Web: standard-groups.com Application The NES 713 Navy Engineering Smoke Toxicity Test Chamber is suitable for evalu... |
 |
Bone Plates Four-point Bending Fatigue Tester | Whats/App: +86 156 1874 6768 Web: standard-groups.com Standard YY/T 1503-2016: Chinese standard specifying test methods for bending fatigu... |
 |
Thermal Radiation Flooring Combustion Tester | Product Standards ISO 9239 - 1: Reaction to fire tests for floor coverings - Part 1: Determination of the burning behaviour of floor coverings usi... |
Same products
 |
Full-Body Garment Stress Tester,FZ/T 70015 | Seller: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com TheFull-Body Garment Stress Testeris a pr... |
 |
Industrial Dry Cleaning Machine,industrial garment steamer | Seller: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com TheIndustrial Dry Cleaning and Energy-Sav... |
 |
MST Medical Compression Stocking Tester,compression sock tester | Seller: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com The MST Medical Compression Stocking Test... |
 |
MMT Liquid Water Separation Tester,MMT Liquid Water Analysis Tool | Seller: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com Applications Textile Manufacturing:Testi... |
 |
Dental material color stability tester | Seller: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com Application The applications of color st... |
