Aluminum Tube Internal Coating Continuity Tester

The Aluminum Tube Internal Coating Continuity Tester is an important device specifically designed for testing the continuity of the internal coating of aluminum tubes.

Applications

The continuity tester for the inner coating of aluminum tubes has extensive application value in multiple fields, and its main uses include: - Quality Inspection: During the production process of aluminum tubes, this tester can be used for the quality inspection of raw materials to ensure that the produced aluminum tubes meet relevant standards and requirements. Through testing, aluminum tubes with coating continuity defects can be promptly identified and removed, preventing unqualified products from entering the market.

- Product R & D: In the product research and development stage, the continuity tester for the inner coating of aluminum tubes can provide important reference information for R & D personnel. By testing aluminum tubes produced under different formulations and processes, R & D personnel can evaluate the continuity and quality of the coating, thereby optimizing the formulation and process to improve product performance and competitiveness.

- Quality Control: During the use of aluminum tubes, this tester can provide an important detection means for quality control departments. Through regular or irregular testing, the continuity and quality changes of the inner coating of aluminum tubes can be monitored, and potential quality problems can be identified and resolved in a timely manner, ensuring product stability and reliability.

Standards

The design and manufacture of the continuity tester for the inner coating of aluminum tubes usually comply with a series of national and international standards to ensure the accuracy and reliability of test results. Among them, common standards include YBB00162002 - 2015 Aluminum Pharmaceutical Soft Tubes, etc. These standards specify in detail the test methods, specimen preparation, test conditions, etc. for the continuity of the inner coating of aluminum tubes, providing a unified standard for the use of the tester.

Features

1. High Specialization: Specifically designed for continuous testing of the inner coating of aluminum tubes, compatible with common aluminum tube specifications of 8-45mm diameter and 35-250mm length, covering most industry application scenarios.

2. High Testing Accuracy: Current measurement accuracy reaches ±0.1mA, accurately identifying minute coating damage and ensuring reliable test results.

3. Flexible Adaptability: The test voltage is adjustable (e.g., DC 5V±0.5V), matching the testing needs of different coating materials and thicknesses.

4. Portable and Easy to Deploy: Compact and lightweight, it can be flexibly deployed in various scenarios such as production sites and laboratories.

5. Multi-Scenario Coverage: Supports full-process applications including raw material quality inspection, new product R&D assistance, and in-use product quality control, contributing to quality management.

Technical Parameters

Technical Parameter	Specification
Testing Range	Applicable to aluminum tubes with a diameter between 8 and 45mm and a tube length between 35 and 250mm (covers most common aluminum tube specifications, ensuring wide applicability).
Testing Accuracy	Usually high; e.g., current measurement accuracy can reach ±0.1mA. High-precision measurements support quality control and product R&D.
Testing Voltage	Usually adjustable within a certain range, such as DC 5V±0.5V. Adjusting voltage meets testing requirements of different coating materials and thicknesses.
Input Voltage and Power Supply	Input voltage: AC 220V 50Hz (standard voltage in most regions); equipped with a stable power supply system to ensure voltage stability and data accuracy.
Appearance Dimensions and Weight	Usually compact and portable (varies by model/brand), enabling use in different production sites and laboratories.
Working Environment	Working temperature: 23℃±2℃; relative humidity: not exceeding 80% (without condensation). Ensures normal operation and test result accuracy.

Accessoriess

Multi-size aluminum tube clamps: Adaptable to aluminum tubes with diameters of 8-45mm and lengths of 35-250mm, ensuring stable sample clamping.

Standard calibration aluminum tubes: Aluminum tube samples with known coating conditions, used for periodic accuracy calibration of the equipment.

Internal coating electrode probe: The detection component that contacts the inner coating of the aluminum tube, ensuring stable transmission of electrical signals.

Data transmission cable: Connects the equipment to a computer, enabling the export and storage of test data.

Probe cleaning brush: Cleans the surface of the electrode probe to prevent coating residue from affecting detection accuracy.

Test Procedures

1. Equipment Preparation

Connect to AC 220V 50Hz power supply. Confirm the working environment (23℃±2℃, humidity ≤80%, non-condensing). After powering on and preheating, calibrate the equipment using a standard calibration aluminum tube.

2. Sample Preparation

Select the aluminum tube to be tested and clean its inner surface (remove impurities). Confirm that the dimensions are within the equipment's testing range.

3. Parameter Setting

Set the test voltage (e.g., DC 5V±0.5V) through the equipment interface, matching the coating material and thickness.

4. Sample Clamping

Fix the aluminum tube in the corresponding specification clamp, ensuring full contact between the electrode probe and the inner coating.

5. Start Testing

Run the testing program. The equipment automatically detects the electrical continuity of the coating and records the data.

6. Result Determination

Determine whether there are defects such as discontinuities or breaks in the coating based on the current data.

7. Post-processing

Remove the sample, clean the electrode probe, export the data, and generate a test report.

Other supplier products

	Suitcases Vibration Impact Tester	This machine is used to test the shock resistance of various luggage handles, car stitches and overall structure. The method is to load the specifi...
	PV Environmental Test Chamber	Features and Benefits 1.PV environmental test chambercan accurately simulate various temperature and humidity conditions, and the temperature devi...
	Standard Illumination Sample Stage	Standards ISO 3664:2009: Meets international standards for graphic arts and photography view conditions. DIN 6173-2: European norm for illuminant...
	Photo fill light box	Standard CE & FCC Certified: Meets electromagnetic compatibility and safety standards for EU/US markets. RoHS Compliant: Lead-free constructi...
	Building Material Smoke Density Tester	Mainly used for building materials and their products when the static smoke generated by the determination of smoke, is the test of textile materia...

All supplier products

Same products

	Gas Oxidizing Property Tester	Seller: Standard International Group (HK) Limited	Product Description Conforms to ISO 10156-2010 “Gases and Gas Mixtures Selection of Cylind...
	Battery Powder Compaction Density Measurement System	Seller: Standard International Group (HK) Limited	The Battery Powder Compaction Density Measurement System is a precision testing system designed...
	Battery Powder resistance tester	Seller: Standard International Group (HK) Limited	The Powder Resistivity Meter is a precision testing system designed to measure electrical resisti...
	KES-SESRU surface roughness/friction tester	Seller: Standard International Group (HK) Limited	TheRoughness/Friction Tester analyzes hand movements-particularly, strokes-performed by artisans ...
	Air Permeability Tester STD- F8	Seller: Standard International Group (HK) Limited	The Air Permeability Tester is designed to quickly and accurately measure the breathability and p...