Syringe Sealing Negative Pressure Tester

The Syringe Sealing Negative Pressure Tester is a precision instrument designed to evaluate the integrity of syringe barrels under negative pressure conditions. It is widely used to ensure the tightness of disposable sterile syringes, infusion sets, blood transfusion sets, catheters, anesthesia kits, filters, and other medical devices, providing essential quality assurance for production and R&D.

Application

This tester is suitable for a wide range of medical device testing, including:

(1) Disposable syringes of various capacities – verifying barrel integrity and piston sealing under negative pressure.

(2) Infusion sets and blood transfusion sets – assessing fluid-tight performance.

(3) Catheters and anesthesia kits – checking connections for leakage prevention.

(4) Medical filters and quick connectors – ensuring negative pressure resistance and sealing.

(5) Production line quality control – ensuring consistent tightness and performance across batches.

(6) Research and development – evaluating new designs and materials for syringe barrels and fittings.

Standards

The tester complies with the following domestic and international standards:

(1) YY 0053-2008: Single-use sterile syringe (China)

(2) GB 15810-2019: Single-use sterile syringe (China)

(3) ISO 7886-1:2017: Sterile hypodermic syringes – Part 1: Syringes for manual use (International)

(4) ISO 8537-2016: Disposable hypodermic needles (International)

(5) YY 0497-2018: Disposable medical syringes (China)

Features

(1) PLC programmable controller with pressure sensor and control mechanism.

(2) High-brightness LED digital display for real-time monitoring of negative pressure and holding time.

(3) Automatic test completion once the set duration is reached.

(4) Adjustable negative pressure output with high precision.

(5) User-friendly interface supporting both Chinese and English.

(6) Compact, easy-to-operate design suitable for laboratory and production environments.

Parameters

Parameter	Specification
Operation interface	Simplified Chinese / English
Negative pressure detection	-88 kPa, error ≤ ±0.3 kPa, LED digital display
Negative pressure output	-88 kPa ± 0.3 kPa
Detection range	-5 kPa to -99 kPa, adjustable
Test duration	1 s – 9999 s, adjustable, LED display, error ≤ 0.1 s
Power supply	AC 220 V, 50 Hz
Machine power	60 W

Accessories

(1) Main test unit – 1 set

(2) Pressure sensor – integrated

(3) Operation manual – 1 set

(4) Power cable – 1 set

Test Procedures

(1) Install the syringe in the testing fixture, ensuring no pre-tension or deformation.

(2) Set the desired negative pressure and test duration on the interface.

(3) Start the test; the system automatically applies negative pressure and monitors for leaks.

(4) Record the pressure values and duration for evaluation of syringe tightness.

(5) Adjust settings as needed for different syringe types and capacities.

Maintenance Information

(1) Keep the device clean and free of dust and liquids.

(2) Check the pressure sensor regularly for calibration and accuracy.

(3) Store in a stable environment at moderate temperature and humidity.

(4) Follow electrical safety protocols during operation.

(5) Periodically inspect the fixture and control system for wear and replace components as necessary.

Other supplier products

	Liquid Sustained Combustion Tester	This product complies with "Recommendations on the Transport of Dangerous Goods - Manual of Tests and Criteria" 32.5.2 Test L.2: Sustained Combusti...
	Strength Tester for Lead - end of Photovoltaic Modules	Standard IEC 61215-2:2016: Terrestrial Photovoltaic (PV) Modules – Test Requirements for Electrical and Mechanical Components CE Certific...
	Mini Rapid Closed Cup Flash Point Analyzer	Reference Standards： SN/T 3077.1、SN/T 3077.2. SH/T 0768. DL/T 1354. ASTM D93、ASTM D6450、ASTM D3828、ASTM D7094、ASTM D7236、ASTM D56、ASTM D56、ASTM...
	Safety Helmet Roll-off Testing Equipment	Purpose Apply an initial load of a certain force to the rear of the helmet. Then, let a weight specified by the standard fall from a certain heigh...
	Thermal - Cold Cycle Testing Machine	Standard BS 7291: Compliant for thermal cycling tests on thermoplastic pipe systems (1769 Series with pressure chamber). Adaptive Certification...

All supplier products

Same products

	Full-Body Garment Stress Tester,FZ/T 70015	Seller: Standard International Group (HK) Limited	TheFull-Body Garment Stress Testeris a precision instrument designed to quantify the pressure exe...
	Industrial Dry Cleaning Machine,industrial garment steamer	Seller: Standard International Group (HK) Limited	TheIndustrial Dry Cleaning and Energy-Saving Dryer Machinesare designed for high-performance, rel...
	MST Medical Compression Stocking Tester,compression sock tester	Seller: Standard International Group (HK) Limited	The MST Medical Compression Stocking Tester is a professional instrument designed to evaluate the...
	MMT Liquid Water Separation Tester,MMT Liquid Water Analysis Tool	Seller: Standard International Group (HK) Limited	Applications Textile Manufacturing:Testing waterproof fabrics for outdoor gear R&D:Developi...
	Dental material color stability tester	Seller: Standard International Group (HK) Limited	Application The applications of color stability testers for dental materials are mainly reflecte...