Syringe piston thrust tester
Product introduction
The syringe piston thrust tester is a kind of high precision and high stability measuring equipment, which is used to measure the thrust of the syringe piston in the process of pushing. The device adopts sensor technology and data processing technology, which can measure piston thrust accurately and quickly, and provide reliable guarantee for quality control in the production process of syringe.
Test principle
The syringe piston thrust tester is mainly composed of sensors, measurement and control systems and displays. Its principle is based on force measurement. By measuring the force generated by the syringe piston when it pushes out the liquid, it can determine whether its thrust meets the standard requirements.
Meet the standard
GB15811. ISO7886. YBB. YBB. YBB. GB 15810-2019. YY/T0573.2-2018
Main parameter
1. Range: 0-500N (300N 1000N 2000N optional)
2. Speed: 1-500mm/min can be set arbitrarily
3. Error: ±0.1mm/S
4. Power supply: AC 220V±22V, 50Hz
Operation process
1. Fix the syringe on the tester to ensure its stable position;
2. Adjust the measuring range of the tester to match the specifications of the syringe under test;
3. Press the start button, the tester starts to measure the piston thrust;
4. Record the measurement results and judge whether they meet the standard requirements;
5. If it does not meet the standard requirements, it is necessary to adjust the syringeor replace the parts;
6. After completing the test, turn off the tester, and record and file the results.
Send product request
Other supplier products
 |
Wet leakage current test system of photovoltaic module | The Wet Leakage Current Test System is designed for high-precision evaluation of insulation resistance and leakage current in photovoltaic modules ... |
 |
Microbial Barrier Tester | Y/T 0471.5-2017 is a newly updated standard, which specifies the experimental method for evaluating the bacteria-inhibiting performance of the cont... |
 |
Flammability Tester | Standards •ASTM D 1230 •ASTM F 963 •ASTM F2100 •16 CFR PART 1610 Features 1.Stainless steel cabnet, beautiful, corrosio... |
 |
Bone Screw Pull-out Tester | Standard YY/T 1504. ASTM F543: standard specifies a test method for measuring the axial force required to extract or fail a metallic bone screw f... |
 |
Safety Helmets Against Molten Metal Splashing Tester | The Safety Helmets Against Molten Metal Splashing Tester is designed to evaluate helmet performance under extreme thermal hazards, simulating molte... |
Same products
 |
Gas Oxidizing Property Tester | Seller: Standard International Group (HK) Limited | Product Description Conforms to ISO 10156-2010 “Gases and Gas Mixtures Selection of Cylind... |
 |
Battery Powder Compaction Density Measurement System | Seller: Standard International Group (HK) Limited | The Battery Powder Compaction Density Measurement System is a precision testing system designed... |
 |
Battery Powder resistance tester | Seller: Standard International Group (HK) Limited | The Powder Resistivity Meter is a precision testing system designed to measure electrical resisti... |
 |
KES-SESRU surface roughness/friction tester | Seller: Standard International Group (HK) Limited | TheRoughness/Friction Tester analyzes hand movements-particularly, strokes-performed by artisans ... |
 |
Air Permeability Tester STD- F8 | Seller: Standard International Group (HK) Limited | The Air Permeability Tester is designed to quickly and accurately measure the breathability and p... |
