Putty sanding tester
Standard
GB/T 1770
YC/T 315-2009
GB/T 1749-2025
Technical parameters
The technical parameters of the putty sanding tester may vary from model to model, but usually include the following aspects:
Friction speed: Generally adjustable in the range of 0——190 times/min (one way)， the specific speed can be set according to test requirements.
Test stroke: usually 155mm, that is, the movement distance of the grinding head on the sample.
Setting range: The range of grinding times that the counter can be set, generally 0——9999 times (one-way count)， and the two-way count needs to be multiplied by 2.
Load: The load of the grinding head includes the weight of the grinding head itself (such as 570+±15 grams) and the counterweight block that can be added (such as 50+3 grams, 100+4 grams, 200+7 grams each) to simulate different grinding pressures.
Test template specifications: generally tinplate, size 50x120mm or 200mmx80mm(thickness 0.3——1.5mm)， the specific size may vary depending on the instrument model.
Power supply and power: Usually 220V 50Hz/60Hz power supply, the power is about 40W.
Dimensions and weight: Dimensions may vary depending on the instrument model, but are generally compact and easy to operate; The weight is also within an acceptable range for easy movement and placement
Send product request
Other supplier products
 |
Fully Automatic Continuous Flow Reaction Calorimeter | Standards SN/T 3078.1. NY/T 3784. GB 51283 Product Features： 1. Using the coefficient calibration method and flow - regulation calorimetry, it c... |
 |
Cut Susceptibility Tester | Standard IEC 61730-2: Photovoltaic (PV) Module Safety Qualification – Requirements for Testing UL 1703: Flat-Plate Photovoltaic Modules and... |
 |
Dry Sand Rubber Wheel Wear Tester | Standard ASTM G65 JBT_7705 Applicable standards Dry and wet abrasive wear testing machines usually need to follow certain standards and specifi... |
 |
Safety Helmets Wearing Stability Tester | Standard GB 811-2022: Safety Helmets – General Technical Requirements GB 24429-2009: Sports Helmets – Requirements and Test Methods ... |
 |
Dry Sand Rubber Wheel Wear Test chamber | Standard ASTM G65 JBT_7705 Applicable standards Dry and wet abrasive wear testing machines usually need to follow certain standards and specifi... |
Same products
 |
Gas Oxidizing Property Tester | Seller: Standard International Group (HK) Limited | Product Description Conforms to ISO 10156-2010 “Gases and Gas Mixtures Selection of Cylind... |
 |
Battery Powder Compaction Density Measurement System | Seller: Standard International Group (HK) Limited | The Battery Powder Compaction Density Measurement System is a precision testing system designed... |
 |
Battery Powder resistance tester | Seller: Standard International Group (HK) Limited | The Powder Resistivity Meter is a precision testing system designed to measure electrical resisti... |
 |
KES-SESRU surface roughness/friction tester | Seller: Standard International Group (HK) Limited | TheRoughness/Friction Tester analyzes hand movements-particularly, strokes-performed by artisans ... |
 |
Air Permeability Tester STD- F8 | Seller: Standard International Group (HK) Limited | The Air Permeability Tester is designed to quickly and accurately measure the breathability and p... |
