Test for Flammability of Materials ,AS1530.2,Fire reaction test apparatus

• 

Introduction

Thistester is developed base on thestandard AS1530.2. test for flammability of materials. The method is applied to the testing of a thin sheet or woven material which is sufficiently pliable to be inserted into the test apparatus by hand withoutspecial softening treatment,

Standard

AS1530.2 Test for flammability of materials.

so that it may be graded according to a flammability index.

Apparatus

Two parallel brass rails, light gauge angle section which is formed in length to be slightly convex, with location pin;

All other frames made of stainless steel material;

A533.4mm scaler is fixed to one side of the mounting frame, with 21 equally space and 25.4mm apart;

Two stainless steel wire alone location pin with lightly tension to a held specimen in position;

Ignition copper trough, with an internal dimension of 20mmx10mmx3mm, with brass support, height-adjustable.

Stainless steel flue and hood;

4 thermocouple, type K, positioned symmetrically within the flue, 570mm above the test specimen;

1 thermocouple, type K, positioned in the control box, monitor ambient temperature;

Labview software with DAQ module for temperature record and the Area (A) calculation;

Other supplier products

	Safety Helmet High Temperature Pre-Treatment Chamber	The safety helmet high-temperature pre-treatment chamber is manufactured according to the GB/T2812-2019 standard for safety helmets and is primaril...
	Solar Simulation Chamber 丨Solar Simulation Tester	Features and Benefits 1.Full-spectrum precise reproduction a 4500 Wwater-cooledxenon arc lamp and SUS 304 mirrorworkroom, the spectral range co...
	Diaper impurity testing machine	The Diaper Impurity Testing Machine is designed for visual inspection of disposable diapers under controlled lighting conditions to detect residual...
	Fire retardant wood wood stack method burning test equipment	Product Introduction: Fire retardant wood stack method combustion test device is a test device developed and produced by referring to the People's...
	Scratch tester STD-KK03	Introduction With the continuous expansion of the use of plastic molding products, from the point of view of the surface appearance of molded prod...

Same products

	Test for Flammability of Materials ,AS1530.2,Fire reaction test apparatus	Seller: Standard International Group (HK) Limited	Introduction Thistester is developed base on thestandard AS1530.2. test for flammability of mate...
	Building Material Radiant Panel Test Machine,AS/NZS 1530.3	Seller: Standard International Group (HK) Limited	Products This machine is designed according to AS/NZS 1530.3; Thedeviceviaagasradiantplatetohea...
	Radiant Panel Flame Spread Apparatus，fire spread test machine	Seller: Standard International Group (HK) Limited	Description ASTM E162 is one most widely used test standard to evaluate the propagation properti...
	Single-Flame Source Tester， ISO11925-2，DIN 53438; DIN4102-1	Seller: Standard International Group (HK) Limited	Introduction This instrument is designed according to ISO11925-2. it is used to test building ma...
	Density of Smoke from the Burning or Decomposition of Plastics，ASTM D2843 Smoke Density Test	Seller: Standard International Group (HK) Limited	Introduction In a fire, people are often smoke suffocated or unable to escape because of the inv...