Tube Dropping Impact Tester
Tube Dropping Impact Tester - Material and Parts of Automotive - standard
Standards:
GB / T14152-2001 "Thermoplastics pipes-Determination of resistance to external blows-Round-the-clock method"
Applications:
Tube dropping impact tester is applies to determine the anti-external force impact performance for all kinds of pipe materials (PVC-U water supply pipe, sewage pipe, low-pressure water supply pipe, low pressure water transport pipe, foamedsandwichpipe, double-wall corrugated pipe, PE water supply pipe, communication pipe) and hard plastic sheet, profiles, auto parts, and is a test instrument, used to evaluate the impact resistance of materials.
Product Information:
Tube dropping impact tester is a test instrument for evaluating the impact resistance of pipe materials, the height of lift up or down with a touch screen display, intuitive and accurate. Product design completely meets with the ZBN72026 "dropping impact tester technical conditions" standard requirements.
Feature
1, equipment is beautiful, equipment shell using spray method, strong in mechanical strength, corrosion-resistant.
2, high security, hammer head is tied by the guide rail to ensure that the hammer head is not derailed.
3, hammer head is lifted up or down by the servo motor to ensure the accuracy of the lift displacement.
4, hanging hammer and hug hammer adopt cylinder control, fast reaction, and good durability.
5, prevent secondary impact (capture rate 100%).
6, the control core adopts imported Omron PLC, effectively reduce external interference, greatly improving equipment stability.
7, with a high degree of automatic control, display, drop hammer and other action and other advantages.
8, the software aspects: touch screen control, display rich content.
Technical Parameters
| Items | Parameters |
| Maximum impact energy | 300J |
| Hammer head | D25, D90 |
| Impact height | 50mm ± 2mm ~ 2000mm ± 2mm |
| Impact height error | ± 2mm |
| Energy loss | <0.25% |
| Repeat positioning error | <± 1mm |
| Applicable pipe diameter | Φ20mm ~ Φ400mm |
| Voltage of power supply | AC220V 50Hz |
Send product request
Other supplier products
 |
Mask Tensile Testing Machine | Standards: ISO13934-1,13934-2,13935-1,13935-2,13936-1,13936-2,13936-3,13937-2,13937-3,13937-4,1421, 2411, 2062, 4674-1,5082, 9073.3, 9073.4, 907... |
 |
Total Hip Joint Prostheses Wear Tester | Standard YY/T 0651.1-2016 (China): Specifies wear testing parameters for total hip prostheses, including angular motion, loading modes, and envi... |
 |
Paper folding tester | Paper folding tester - Other test instrument - standard Product Information: Test principle The machine uses the motor drive screw to move the f... |
 |
Anti Synthetic blood penetration tester | Standards: GB 19083-2010 Technical requirements of medical face masks - Anti-penetration property of 5.5 synthetic blood. YY/T 0691-2008 Clothin... |
 |
Textile Air Permeability Tester | Meet the standard: ASTM D737 ISO 9237 EDANA WSP 070.1 JIS L1096 Product Introduction: Air permeability is defined as the volume of air that... |
Same products
 |
Battery Diaphragm Gas Permeability Tester ISO | Seller: Standard Groups | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The Battery Diaphragm Gas Permea... |
 |
Torsion Testing Tester ASTM, JIS, and DIN | Seller: Standard Groups | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The Universal Torsion Testing Ma... |
 |
Wire Torsion and Winding Tester ASTM and JIS | Seller: Standard Groups | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The Wire Torsion and Winding Tes... |
 |
Metal Wire Repeated Bending Tester ISO/DIS 7801 | Seller: Standard Groups | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The Metal Wire Repeated Bending ... |
 |
Metal Wire Wrap Tester ISO 4101 | Seller: Standard Groups | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The Metal Wire Wrap Tester is de... |
