Pipe drop hammer impact testing machine
Pipe drop hammer impact testing machine - Other test instrument - standard
Product Information:
Product Introduction:
1. Name: drop hammer impact testing machine
2. Model :G-1
3. Product introduction: Automatic series drop hammer impact testing machine is suitable for all kinds of pipes （PVC a U water pipe, sewage pipe, low pressure water pipe, low pressure water pipe, core layer foam pipe, double wall bellows, PE water pipe, communication pipe） and hard plastic sheet, profiles, auto parts of the external impact performance measurement. It is a kind of test instrument used to evaluate the impact resistance of materials. The lifting height is displayed by the touch screen, which is intuitive and accurate. The product design fully meets the standard requirements of ZBN72026 "Technical Conditions of drop hammer impact testing machine".
Detailed parameters:
1. Maximum impact energy :300J
2. Impact height :50mm+2mm——2000mm+2mm
3. Impact height error :±2 mm
4. Energy loss :{<}0.25%
5. Repeated positioning error :{<}±1mm
6. Applicable pipe diameter: medium 20mm—— medium 400mm
7. Power source :AC220V-15%——AC220V+10% 50Hz 500W（single-phase three-wire system）
8. Size :1280mmx600mmx3950mm（Type A）
Product features:
The testing machine adheres to the excellent design concept, adopts imported and military components, the hammer is made of scratch resistant steel to extend the service life, adopts PLC control, touch screen display impact height, with automatic suction hammer, automatic zero, automatic lifting, automatic lifting hammer to the preset height, prevent secondary impact （capture rate 100%） and other functions. The special control panel and display screen equipped with the machine can meet the operation and display requirements required by the user test, such as display instant information, real-time display height and running speed, impact height setting, etc. The system also has power failure protection function. It has the advantages of automatic control of height, display and drop hammer.
In order to meet the requirements of GBT14152-2001 （after the sample is pretreated at 0℃， the requirement of 20 seconds from taking out the sample to completing the impact）， the automatic drop hammer program is adopted after the experiment is started. The equipment has the advantages of simple and convenient operation, safe and reliable, small machine height, easy installation, labor saving and so on.
Send product request
Other supplier products
 |
Heat Storage Performance Tester | Heat Storage Performance Tester - Textile and Apparel - standard Standards: ASTM F2731 ?Standard Test Method for Measuring the Transmitted and ... |
 |
Shoe bending Angle tester | Shoe bending Angle testing machine is mainly used for outsole rigidity test, with a solid block the front of the shoe clamped on the hard base, wit... |
 |
Convective Heat Resistance Tester | Convective Heat Resistance Tester - Textile and Apparel - standard Standards: ISO 17493 Clothing and equipment for protection against heat - Te... |
 |
Cold Fold Tester Chrysler | Standards: LP-463-KB-28-01 Method A Applications: This tester is applied to the cold fold test based on Chrysler method and can measure the resi... |
 |
5kN Universal Testing Machine ISO13934-1 ASTM D5587 | This series of testing machines realizes the automatic control of the test process, data acquisition and analysis through the computer, and realize... |
Same products
 |
Battery Diaphragm Gas Permeability Tester ISO | Seller: Standard Groups | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The Battery Diaphragm Gas Permea... |
 |
Torsion Testing Tester ASTM, JIS, and DIN | Seller: Standard Groups | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The Universal Torsion Testing Ma... |
 |
Wire Torsion and Winding Tester ASTM and JIS | Seller: Standard Groups | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The Wire Torsion and Winding Tes... |
 |
Metal Wire Repeated Bending Tester ISO/DIS 7801 | Seller: Standard Groups | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The Metal Wire Repeated Bending ... |
 |
Metal Wire Wrap Tester ISO 4101 | Seller: Standard Groups | Get a quote： Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The Metal Wire Wrap Tester is de... |
