Helmet UV pretreatment box
Helmet UV pretreatment box - Other test instrument - standard
Standards:
Applications:
Product Information:
Product Introduction:
Helmet ultraviolet pretreatment box is used for helmet ultraviolet irradiation pretreatment, according to the new national standard GB/T 2812-2006 "Helmet test method", GB/T 2811-2019 "helmet" development, widely used in special labor protection equipment supervision and inspection station, building science research institute, construction engineering inspection station.
Main parameters:
1, ultraviolet radiation source: 450W high pressure short pulse xenon lamp
2, Cooling method: air-cooled
3, timing range: 0-999 hours
4, the number of pretreatment helmets: 1--14
5, Working power supply: AC220V 50Hz 800W
Send product request
Other supplier products
 |
Bearing Friction Torque Measuring Instrument | Main Purposes of Bearing Friction Torque Tester The bearing friction torque tester is a precision instrument specifically designed for measuring t... |
 |
Face Mask Tensile Tester | Introduction: The test machine uses the integrated structure of the motor and the speed control system to drive the synchronous belt deceleration ... |
 |
Bone Cement Four-Point Bending Fatigue Tester | Standard YY/T 1429 (China): Specifies four-point bending fatigue tests for acrylic resin bone cements under quasi-static and cyclic loading. IS... |
 |
Wool Shrinkage Tester | Product Introduction: 1, YM116 type wool fold shrinkage tester is a precision instrument to determine the length of the towel under the standard t... |
 |
Mask flame retardant tester | Standards: GB 19083-2010， EN 149, GB 2626, YY 0469 Applications: Mask Flame Retardant Tester is a special test instrument for flame retard... |
Same products
 |
Falling Sand Abrasion Test machine | Seller: Standard International Group (HK) Limited | The sand abrasion tester is a specialized testing device used to evaluate the abrasion resistance... |
 |
Conveyor Belt Drum Friction Testing Machine | Seller: Standard International Group (HK) Limited | Main Purposes of Conveyor Belt Drum Friction Testing Machine The conveyor belt drum friction tes... |
 |
Dry Sand Rubber Wheel Wear Tester | Seller: Standard International Group (HK) Limited | The dry sand rubber wheel abrasion tester is mainly used to test the abrasion resistance of mater... |
 |
Sliding Bearing Fatigue Testing Machine | Seller: Standard International Group (HK) Limited | The sliding bearing fatigue testing machine is an important testing device, mainly used to evalua... |
 |
High temperature vacum friction & wear tester | Seller: Standard International Group (HK) Limited | The working principle of a high-temperature vacuum friction and wear testing machine is to simula... |
