rain tester AATCC 35 BS EN ISO 22958
Standards:
AATCC 35. BS EN ISO 22958
Applications:
Rain Tester is designed for determining the water-repellent property of fabrics or composite materialsunder different rainfall pressure.
Product Information:
This instrument can simulate rain horizontally spraying to the tested sample which is vertically fixed in the stainless steel tank. The back of the specimen is adhered to the standard suction filter paper (weighing before and after the test). The water in the water column is sprayed into the rain by the standard nozzle, while the water column can be changed from 600mm(24 inches) to 2400mm(96 inches) by 300mm inciments (12 inches).
The rainproof tester provides an LCD color touch screen with an interactive user interface, which can preset the ISO and AATCC test standards, water temperature, water column height and test time. The built-in cistern can recycle the water that is sprayed on the sample, with a heater that controls the water temperature. The precision water pump can automatically maintain the water column in the nozzle to the set the height.
The tester cannot be refitted, but can be ordered with new rain tester. We can provide a temperature-controlled water supply system that includes an electronic temperature controller, a mixing tank, and a solenoid control valve.
Techncial Parameters:
1. Control: LCD color touch panel;
2. Water column: 60 ~ 150cm + 1.5cm (standard), 60 ~ 240cm + 1.5cm (extension);
3. Sample rack: 285 by 190mm (305mm from the nozzle);
4. Heater: 1000W;
5. Temperature control: room temperature 40 ℃ ~ + / - 0.8 ℃ (no cooling device);
6. Supply of water: tap water or distilled water;
7. Reservoir: 40L;
8. Dimensions: 700 x 600 * 2460mm (long x width x height);
9. Weight: 125kg(275lb);
10. Power supply: 23/120vac, 50/60hz.
Configuration:
1. Anti-rain testing instrument with LCD color touch screen control panel;
2. Water column pipe, 240cm;
3. Standard sprinkler nozzle;
4. Sample rack and chassis;
5. 40L reservoir;
6. 150cm water column tube (optional);
7. AATCC filter paper 500 x 1000mm(25 pieces) (optional).
Send product request
Other supplier products
 |
Circular Locus Pilling Tester | Testing Standards: GB/T 4802.1. JIG 040-1990 Product Information: The Circular Locus Pilling Tester is used for determining the pilling and fu... |
 |
Paper smoothness meter | Product Information: Implementation standards: ISO 5627 Paper and board - Determination of smoothness （Buick method） GB/T 456 "Paper and board s... |
 |
Hand cranking Textile Crockmeter ISO 105 D02 X12 AATCC 8/165 | Introduction Manual friction fastness tester is the most commonly used instrument for the textile industry to detect the color fastness of the fab... |
 |
GMA Ultra-filtration Membrane Porometers ISO 4003-1990 ASTM F316-2003 | Standards: ASTM F316-2003. ASTM D6767-2002. ASTM E1294-1999. ISO 4003-1990. GB/T 14041.1-2007. HY/T 051-1999. HY/T 064-2002 Applications: Based ... |
 |
Cleanliness Analysis System | Production： The cleanliness analysis system fully complies with the requirements of standards such as VDA19.1 - 2015. ISO16232. ISO4406. ISO4407. ... |
Same products
 |
Xenon Test Chamber | Seller: Standard International Group (HK) Limited | Features and Benefits 1.The use of xenon arc lamp as a light source, can simulate the full sunli... |
 |
Single Cable Vertical Flame Tester | Seller: Qinsun Instruments Co., LTD | Introduction Single Cable Vertical Flame Tester is used for the vertical flame propagation of a ... |
 |
Safety Helmet Flammability Tester | Seller: Qinsun Instruments Co., LTD | Product Introduction: Safety hat flame retardant performance tester for safety hat flame retarda... |
 |
Furniture flammability tester | Seller: Qinsun Instruments Co., LTD | Product details Furniture flammability tester is mainly used to test the combustion performance ... |
 |
Flame retardant testing machine | Seller: Qinsun Instruments Co., LTD | Feature highlights: Flame Retardant Tester is designed for testing plastic runway surface layers... |
