Yellowing resistance test chamber
Designed specifically for testing upper and bottom materials for shoes, the chamber utilizes a 300W UV light bulb imported from Germany, ensuring high-quality and reliable results. The temperature range of the chamber is adjustable from room temperature plus 5°C to 200°C, with a uniformity of ±2°C, providing precise control over testing conditions.
The Yellowing Resistance Test Chamber features a user-friendly LED digital display and a PID temperature controller, making it easy to monitor and adjust settings. With a time control feature that allows for testing durations of up to 9999 minutes or hours, this chamber is versatile enough to accommodate various testing needs. The test frame has a diameter of 400mm and offers adjustable speeds from 1 to 20 rpm, ensuring thorough and consistent testing of samples.
Scope of application:
Test method for determining the yellowing resistance of light and white products, such as upper and bottom materials for shoes, to approximate sunlight and ultraviolet light. According to the light-colored or white products, the phenomenon of yellow color is easy to occur in the natural sunlight for a long time, with the solar lamp and heating temperature control device to simulate the natural environment, within the specified time, observe the change of the surface color of the sample, determine the degree of discoloration of the sample, so as to determine the ability of the material to resist yellow under sunlight radiation.
Applicable standards:
HG/T3986. ASTM D1748. etc.
Technical parameters:
Light source: 300W UV light bulb imported from Germany;
Temperature range: Room temperature +5℃ ——200℃℃：
Temperature uniformity :± 2'C;
Electric heating power: 500W and 1000W two groups;
Temperature control :LED digital display, PID temperature controller:
Time control :0——9999min or 0——9999h;
Test frame: diameter 400mm, speed 1——20rpm adjustable, single-layer test frame;
Working rate size :500x500x600mm(WxDxH);
Dimensions :500x500x600mm(WxDxH);
Power supply :AC220V, 1.8KW.
Send product request
Other supplier products
 |
PV Backsheet Abrasion Tester | Standard IEC 61730-2: Photovoltaic (PV) Module Safety Qualification – Requirements for Testing UL 1703: Flat-Plate Photovoltaic Modules a... |
 |
Goggles Puncture Resistance Testing Machine | Applicable standards: GB 811-2010 Purpose It is to make a certain weight of sharp objects fall from the height specified in the standard and a... |
 |
Electric notch machine | Plastic electric notch prototype is a cantilever beam, simply supported beam impact testing machine to do the impact toughness test of non-metallic... |
 |
Respirator Fit Tester | PortaCount Respirator Fit Tester:Qinsun assesses the overall integrity of masks by performing an aerosol leak test utilizing the PortaCount Respira... |
 |
Salt Spray Tester | The Salt Spray Tester is used to create and maintain the salt spray (fog) test environment, and test the anti-corrosion quality of all the material... |
Same products
 |
Air Permeability Tester STD- F8 | Seller: Standard International Group (HK) Limited | The Air Permeability Tester is designed to quickly and accurately measure the breathability and p... |
 |
Surface Performance Tester STD-FB4 - A | Seller: Standard International Group (HK) Limited | Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti... |
 |
Compression Tester STD - FB3 - A | Seller: Standard International Group (HK) Limited | TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar... |
 |
Single - Strand Bending Tester STD - FB2 - SH | Seller: Standard International Group (HK) Limited | Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ... |
 |
Bending Tester STD- FB2 - S | Seller: Standard International Group (HK) Limited | Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig... |
