Static Tensile Tester
Standards:
Standard Accordance with the requirements of the standards such as ASTM D3107
Applications:
Static Tensile Tester isused for static tensile test of elastic fabric performance, adopts aviation aluminum frame design, 304 stainless steel clamp, and weight, excellent imported guide rail, compact structure, stable performance.
Product Information:
Static tensile tester
Application
Used for static tensile test of elastic fabric performance, adopts aviation aluminum frame design, 304 stainless steel clamp, and weight, excellent imported guide rail, compact structure, stable performance, which is the economic strength test instrument firstly selected by broad masses of manufacturers, scientific research institutions, commodity inspection, quality inspection units.
Test Principle
According to ASTM D 3107-2007 test principle, hold the specimen with top end of the machine clamped to the other end, the initial load is applied to certain heavy weights from the lower end of the holder, make two marks from the sample under the sample holder; then to making a predetermined weight on the sample weight, wait for one hour, or measure the distance between the two marks after the fixed time; remove the load weight, load is applied to the initial weight after 30 seconds, or one hour or other specified time again measure the distance between two markers; then calculate the sample elastic recovery rate (%) and residual deformation rate (%) by special formula; specific time, weight and length of the sample weight parameters which can be negotiated by customer choice.
Main Features
Executable constant elongation tests, constant load test, flexible sample clamp, equipped with positioning block which can be fixed anywhere on the rail, the use of adjustable knob fixture design, suitable for testing different samples.
The basic technical specifications:
1, test station: six;
2, the body material: aluminum alloy
3, clamping equipment quality: stainless steel
4, load weight: 3 pounds one set, 4 pounds one set
5, gripper effective clamping width: 60 mm or higher
6 the distance between gripper: 30-750 - mm (adjustable)
7, flat triangle hook gripper: 6
8. Scale length: 900 mm
9, size: 1100 * 500 * 1350 mm
10, weight: 60 kg
Send product request
Other supplier products
 |
Air Permeability Tester ISO 7231 ASTM D737 | Standards: BS 5636. JIS L1096-A, DIN 53887. ASTM D737. ASTM D3574. EN ISO 9237. GB/T 5453. EDANA 140.2. TAPPI T251. EDANA 140.1. ASTM D737. AFNOR ... |
 |
Polysilazane Resin STD-8812 | Introduction STD 8812 is a vinyl-containing polysilazane resin that serves as a ceramic precursor. It cures under heating, exhibits excellent adhe... |
 |
Infusion Pump Flow Rate Tester | Infusion Pump Flow Rate Tester - Other test instrument - standard Product Information: Main Uses of the Infusion Set Flow Rate Tester The infusi... |
 |
Creep testing machine with full incision/ Full-Notch Creep Tester / FNCT Creep Testing Machine | Standard ISO 16770: Exclusively designed for full-notch creep testing (FNCT) of thermoplastics under sustained stress. ASTM D2990: Configurable... |
 |
Paper water absorption tester | Paper water absorption tester - Other test instrument - standard Product Introduction: Paper water absorption tester, also known as Kleim test in... |
Same products
 |
Falling Sand Abrasion Test machine | Seller: Standard International Group (HK) Limited | The sand abrasion tester is a specialized testing device used to evaluate the abrasion resistance... |
 |
Conveyor Belt Drum Friction Testing Machine | Seller: Standard International Group (HK) Limited | Main Purposes of Conveyor Belt Drum Friction Testing Machine The conveyor belt drum friction tes... |
 |
Dry Sand Rubber Wheel Wear Tester | Seller: Standard International Group (HK) Limited | The dry sand rubber wheel abrasion tester is mainly used to test the abrasion resistance of mater... |
 |
Sliding Bearing Fatigue Testing Machine | Seller: Standard International Group (HK) Limited | The sliding bearing fatigue testing machine is an important testing device, mainly used to evalua... |
 |
High temperature vacum friction & wear tester | Seller: Standard International Group (HK) Limited | The working principle of a high-temperature vacuum friction and wear testing machine is to simula... |
