Auto - ignition Point Tester for Liquids
Standards:
This product complies with GB/T 21860 - 2008 *Test Method for Auto - ignition Temperature of Liquid Chemicals* and ASTM E659 - 78(2005) *Test Method for Auto - ignition Temperature of Liquid Chemicals* (English version).
Applications:
Product Information:
1. It adopts an embedded processor and the Windows CE operating system.
2. Equipped with an 8 - inch liquid - crystal touch screen, it can display the test status in real - time.
3. It integrates high - temperature heat - insulation technology, temperature control, and precise detection technology.
4. It uses an electrically heated furnace, enabling fast heating.
5. The furnace chamber is made of heat - insulating vacuum ceramic fiber, providing excellent heat - insulation performance.
6. It uses a thermocouple sensor, which can quickly and accurately respond to temperature changes.
7. It is equipped with an automatic intelligent sample - injection module and a maintenance - free automatic cleaning function.
8. The test process is fully automated, requiring no manual intervention. There are animated image demonstrations of the experiment process, and reports can be generated automatically.
9. It is equipped with a temperature and humidity module, which can monitor the temperature, humidity, and atmospheric pressure of the test environment.
Technical Specifications
- Working environment: (5 ~ 40)°C, <85%RH
- Test object: Liquids
- Temperature control range: Room temperature ~ 650°C
- Temperature control accuracy: ±1°C below 350°C; ±2°C above 350°C
- Temperature measurement range: Room temperature ~ 800°C
- Temperature measurement resolution: 0.1°C
- Temperature measurement accuracy: ±2.5°C below 300°C; ±(0.75% of the reading) above 300°C
- Ambient atmospheric pressure measurement range: (60 ~ 110)kPa
- Ambient atmospheric pressure measurement accuracy: ±0.5kPa
Send product request
Other supplier products
 |
Rupture strength tester | Standard IEC 61730-2: Photovoltaic (PV) Module Safety Qualification – Requirements for Testing UL 61730: Safety Standard for Photovoltaic M... |
 |
Automatic Reaction Calorimeter/ Fully Automated Calorimetry System/ Fully Automated Calorimetry System | Product Features： 1. It offers three calorimetry methods: heat - flow, power - compensation, and reflux, allowing users to choose according to the... |
 |
Vertical Flammability Test Chamber ASTM D6413 CALIF TB117 | Standards: ASTM D6413. CALIF TB117. DOC-FF 3/71. 16CFR Parts1615/1616. FTMS 191-5903. CPAI 84 Applications: The Vertical Flammability Test Chamb... |
 |
MARK-II anti-slip testing machine | Product Introduction: Paste the cut sample on the test fixture of the portable MARK-II anti-slip testing machine, put down the weight of the rotat... |
 |
High - speed Pellet Impact Testing Machine for Helmet Goggles | Standards: SNELL SA/K2010, EN 166, EN 168, ANSI Z87.1, MIL - PRF - 32432 Applications: To test the impact - resistance performance of glas... |
Same products
 |
Falling Sand Abrasion Test machine | Seller: Standard International Group (HK) Limited | The sand abrasion tester is a specialized testing device used to evaluate the abrasion resistance... |
 |
Conveyor Belt Drum Friction Testing Machine | Seller: Standard International Group (HK) Limited | Main Purposes of Conveyor Belt Drum Friction Testing Machine The conveyor belt drum friction tes... |
 |
Dry Sand Rubber Wheel Wear Tester | Seller: Standard International Group (HK) Limited | The dry sand rubber wheel abrasion tester is mainly used to test the abrasion resistance of mater... |
 |
Sliding Bearing Fatigue Testing Machine | Seller: Standard International Group (HK) Limited | The sliding bearing fatigue testing machine is an important testing device, mainly used to evalua... |
 |
High temperature vacum friction & wear tester | Seller: Standard International Group (HK) Limited | The working principle of a high-temperature vacuum friction and wear testing machine is to simula... |
