Contact heat resistance tester
A Contact Heat Resistance Tester is a specialized laboratory instrument designed to measure a material's ability to resist and protect against heat transfer through direct contact.
This tester works by applying a heated surface at a controlled temperature and pressure to a material specimen. It then measures the amount of time it takes for the temperature on the material's opposite (unexposed) side to reach a specified threshold, or the temperature increase after a set duration. This provides critical data for evaluating the thermal protective performance of materials used in gloves, protective clothing, and other applications where direct contact with hot objects or surfaces is a risk. It's essential for ensuring safety and compliance with relevant industry standards.
Compliance Standards:
EN 702, EN 12477, EN 407, ISO 12127
Scope of Application:
Suitable for testing thermal protection performance of firefighter suits, heat-resistant gloves, and related materials.
Product Details:
The contact heat resistance tester evaluates materials' ability to withstand high-temperature contact heat by measuring the time required for specimen temperature to rise 10°C under specified pressure and heating conditions. This critical time determination provides quantitative assessment for thermal protection material development and performance evaluation.
Technical Specifications:
1. High-temperature heating element (Φ25.2mm) with:
a. Sensitive thermocouple sensor
b. Temperature settable from room temperature to 500°C
2. Insulated heating element coating to prevent heat dissipation interference
3. 49N contact force provided by weighted pressure plate
4. Alumina-anodized temperature probe (Φ25mm, 5mm) with ±0.1°C accuracy
5. Motorized sample holder system:
a. 5mm/s precise motion control
b. Contact heating body at controlled speed
6. One-touch testing with LED display showing:
a. Initial specimen temperature
b. Real-time temperature
c. Critical 10°C rise time (±0.1s resolution)
7. Dimensions: 800×50×550mm (W×D×H)
8. Power requirement: 230V 50Hz AC
Send product request
Other supplier products
 |
Steel wheel wear testing machine | Meet the standard: GB/T3810.7-2016 "Wear resistance test method for unglazed brick" ISO/DIS10545/6-94 "Unglazed brick resistance to deep wear tes... |
 |
Mask Flame Flammability Tester | introduction: The flame-retardant tester of medical mask is used to test the flame-retardant performance of the mask when it is accidentally conta... |
 |
Sweating Guarded Hotplate/ Thermal Insulation and Moisture Permeability Tester / Fabric Thermal Resistance Tester | Testing Standards:GB/T 11048, ISO 11092, ASTM F1868, ASTM D1518, JIS L1096 Application The Thermal resistance wet resistance tester simulates t... |
 |
Multi-function Burling Machine | Basic characteristics： Fabric inspecting width: 1800/2000/2400mm Maximum batching diameter: 500mm Power supply voltage:AC220V±50Hz Rolli... |
 |
Vehicle Cabin Air Filter Tester | Applicable standards: DIN 71460-1 Road vehicles - Air filters for passenger compartments of motor vehicles - Part 1: particulate matter filtration... |
Same products
 |
KL‑016A Benchtop High‑precision pH Meter | Seller: Kelilong Electron Co.Ltd | Product Description: Large‑screen display with high resolution and precision for con... |
 |
Large Naïve VHH Library | Seller: AlpVHHs | Large Naïve VHH Library VHHare single-domain antibodies derived from the variable regions o... |
 |
pH-2398 pH/EC/ORP/Temperature multi-parameter Water Quality Tester | Seller: Kelilong Electron Co.,Ltd | Feature Large display screen, capable of simultaneously measuring water quality pH, redox potent... |
 |
ORP-2026S Waterproof Soil ORP and Temperature Meter | Seller: Kelilong Electron Co.,Ltd | 范围 ORP -999～999mV Temp 0～50℃ 分辨率 ORP 1mV... |
 |
TDS-2616 Waterproof EC/TDS/Temperature Meter | Seller: Kelilong Electron Co.,Ltd | Range EC ～19.9mS TDS Temp 0～50℃ R... |
