Acceleration Impact Performance Testing Machine for Safety Helmets
Standards:
GB2812 - 2019
Applications:
This instrument is suitable for impact - collision tests of helmets. It is a testing instrument used to evaluate the impact - resistance performance of helmets. Meanwhile, it can also meet the requirements of penetration tests. Just replace the fixture, and it is easy to operate.
Product Information:
Technical Parameters for Impact Test
1. The base is made of concrete material with a mass of not less than 500kg. 2. Total height of the machine: approximately 4.2 meters 3. Weight of the impact hammer: 5.0 + 0.1kg, with a hemispherical impact surface, a radius of 48±1mm, made of 45# steel, and having a symmetric and smooth appearance. 4. Impact height: 1000±5mm 5. Equipped with a force sensor, with a measurement range of (0 - 20000) N and a minimum frequency response of 5KHZ. 6. Force sensor, acceleration sensor
Technical Parameters for Penetration Test
1. Weight of the penetration hammer: 3.0 + 0.05kg 2. Angle of the tip of the penetration hammer: 60±0.5° 3. Minimum length of the tip of the penetration hammer: 40mm 4. Hardness: 50 to 45HRC 5. Penetration height: 1000±5mm
Send product request
Other supplier products
| System of Spinal Pedicle Screw-Rod System Torsional Fatigue Tester | Standard YY/T 0857-2011 (China): Specifies torsional fatigue testing protocols for spinal pedicle screw-rod systems, including load ratios, freq... | |
| Water Leak Detector/ Gas Release on Water Contact Tester/ Material Gas Emission Tester | Product Description GB/T 21619-2008 Test Methods for Dangerous Goods Flammable Solids Emitting Flammable Gases in Contact with Water, GB 19521.4-2... | |
| Shoe heat insulation testing machine -- sand bath/ Sand Bath Thermal Conductivity Tester / Shoe Heat Insulation Tester | Standard GB/T 20991: Determines thermal insulation of safety shoe soles under simulated hot surface exposure. EN ISO 20344: European standard f... | |
| BBA steady state solar simulator tester | Standard IEC 61215: Terrestrial Photovoltaic (PV) Modules – Design Qualification and Type Approval IEC 61646: Thin-Film Terrestrial Photo... | |
| Helmets Designated Protection Areas Tester/ Head protection zone testing equipment/ headgear critical impact area testing machine | In high-risk environments, a helmet is often the most critical piece of personal protective equipment (PPE), offering a vital barrier against impac... |
Same products
| Battery Diaphragm Gas Permeability Tester ISO | Seller: Standard Groups | Get a quote: Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The Battery Diaphragm Gas Permea... | |
| Torsion Testing Tester ASTM, JIS, and DIN | Seller: Standard Groups | Get a quote: Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The Universal Torsion Testing Ma... | |
| Wire Torsion and Winding Tester ASTM and JIS | Seller: Standard Groups | Get a quote: Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The Wire Torsion and Winding Tes... | |
| Metal Wire Repeated Bending Tester ISO/DIS 7801 | Seller: Standard Groups | Get a quote: Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The Metal Wire Repeated Bending ... | |
| Metal Wire Wrap Tester ISO 4101 | Seller: Standard Groups | Get a quote: Whats/App: +86 185 0176 3615 Web: qinsun-lab.com The Metal Wire Wrap Tester is de... |













