Helmet Wearing Height Testing Machine
The helmet wearing height testing machine is a testing device used to evaluate the comfort and safety performance of helmets. It precisely measures the wearing height parameters to ensure that the helmet fits the human head according to design requirements. In the manufacturing process, manufacturers use this device to quantitatively test helmet samples, verifying whether the vertical distance between the headband, liner, and the top of the head is reasonable.
Application
Measure the wearing height of helmets to ensure the accuracy and safety of helmet - wearing positions.
Standard
EN 397:Industrial safety helmets
GB 2812:Head protection—General test methods
Feature
1. Height measurement scale with 1mm accuracy
2. Rigid base (electroplated surface)
Technical Parameters
| Item | Detail |
|---|---|
| Customization Support | OEM, ODM |
| Power | 500W |
| Voltage | 220V |
| Warranty | 1 year |
| Brand | StandardGroup |
| Model No. | STD-6031 |
| Certification | ISO |
| Color | Gray |
| Packaging | Wooden case |
| Function | Infrared positioning |
| Digital Display Height | High |
Accessoriess
Standard head model
Digital display ruler
Foot measuring device
Fixing bracket
Adjustment mechanism
Data logger
Leveling tool
Fastening clamp
Test Procedures
Select the head form: According to the standard, use head form #1 when the wearing height is ≤85mm; use head form #2 when the wearing height is >85mm.
Install the digital scale: Fix the digital scale to the selected head form using the provided mounting holes.
Zero the scale: Pull the digital scale to the bottom and press the zero button.
Adjust the measuring caliper: Measure the distance between the side straps of the helmet and adjust the measuring caliper to the appropriate length.
Wear the helmet: Place the helmet normally on the selected head form.
Read the value: Pull the digital scale until the measuring caliper touches the side straps, and read the value B1.
Calculate the wearing height: Subtract B1 from 280 to obtain the helmet wearing height.
Send product request
Other supplier products
 |
Liquid Spontaneous ignition point tester | Product Description complies with GB/T 21860-2008 “Test Method for Autoignition Temperature of Liquid Chemicals” and ASTM E “Tes... |
 |
Safety Helmets Impact and Penetration Resistance Tester | Standard GB/T 2811-2019(China’s national standard for helmet safety and impact resistance) GB/T 2812-2006/XXXX(Testing methods for impact a... |
 |
Putty sanding meter | Standard GB/T 1770 YC/T 315-2009 GB/T 1749-2025 Technical parameters The technical parameters of the putty sanding tester may vary from model ... |
 |
Shoe heat insulation meter -- sand bath | Standard GB/T 20991: Determines thermal insulation of safety shoe soles under simulated hot surface exposure. EN ISO 20344: European standard for... |
 |
Suture Needle Elasticity and Toughness Tester | The Elasticity and Toughness Tester for Suture Needles is a specialized device dedicated to detecting the physical properties of elasticity and tou... |
Same products
 |
Falling Sand Abrasion Test machine | Seller: Standard International Group (HK) Limited | The sand abrasion tester is a specialized testing device used to evaluate the abrasion resistance... |
 |
Conveyor Belt Drum Friction Testing Machine | Seller: Standard International Group (HK) Limited | Main Purposes of Conveyor Belt Drum Friction Testing Machine The conveyor belt drum friction tes... |
 |
Dry Sand Rubber Wheel Wear Tester | Seller: Standard International Group (HK) Limited | The dry sand rubber wheel abrasion tester is mainly used to test the abrasion resistance of mater... |
 |
Sliding Bearing Fatigue Testing Machine | Seller: Standard International Group (HK) Limited | The sliding bearing fatigue testing machine is an important testing device, mainly used to evalua... |
 |
High temperature vacum friction & wear tester | Seller: Standard International Group (HK) Limited | The working principle of a high-temperature vacuum friction and wear testing machine is to simula... |
