Three channel Filter Efficiency Test Bench
Introduction
The three-channel filter efficiency test bench can be used to filtration efficiency and resistance testing for non-woven filter material, glass fiber filter material, the new filter material.
Standards
(1) 42CFR84-2005 US new standard for respiratory protection
(2) EN149: 2001 Respiratory protective devices – Filtering half mask to protect against particle - Requirements, inspection and marking
(3) GB19083-2003 Technical requirements for protective face mask for medical use
(4) GB/T2626-2006 Respiratory protective equipment -- non-powered air-purifying particle respirator
(5) EN1822 Highefficiencyairfilters (EPA, HEPA and ULPA) Part2: Aerosolproduction, measuringequipment, particlecountingstatistics
(6) IEST-RP-CC021.1 Testing HEPA and ULPA Filter Media
Composition
·Filter part
·Spray part
·Flow sharing section
·Filter installation part
·Detection, control and data processing output section
·Fan power part
Function
·Efficiency testing
·Resistance testing
Technical Parameters
·Filter test area: 100cm2
·Test flow: 32L / min, 85L / min, 95L / min (optional)
·Efficiency detection range: 85% -99.999%
·Resistance detection range: 0-1250Pa
·Test particle size: PSL (0.3μm) quasi mono-disperse
·DEHS (0.3um-0.5um concentration 70%) (optional)
·Aerosol cross section distribution uniformity: ≤ 10%
·Upstream dilution: 1: 7-10
Accessories
·PSL aerosol generator
|
One |
| ·500 W inverter |
One |
| ·Dilator |
One |
| ·Standard 2.5 flow-meter |
One |
| ·Particle counter |
Two |
| ·Pneumatic filter installation |
One set |
| ·Dedicated data processing software |
One set |
| ·Self-purification filter |
One set |
| ·Electrical console |
One set |
| ·Conveying pipe (stainless steel) |
One set |
|
·Equipment covered area
|
1000 * 650 * 1650mm (L * W * H) |
Other supplier products
|
|
limiting oxygen index apparatus |
The Oxygen Index is, perhaps, the most economical and precise quality control test of combustible materials. Its ease of use together with high lev... |
|
|
Mask Tensile Testing Machine |
Standards:
GB/T 3917.2 Textiles-Tear properties of fabrics-Part 2 Determination of tear force of pants shaped test specimens (single slit) GB/T ... |
|
|
Scrub Abrasion and Washability Tester |
The Scrub Abrasion and Washability Tester is used to test the resistance of paint, varnish or coatings to scratching, wearing, an... |
|
|
Precision Fiber Microtome |
Precision Fiber Microtome
Testing Standards:
ASTM D2130, BS 2043, DIN 53811, ISO 137, IWSTM 24, IWTO 8-6
Applications:
Precision Fiber Micr... |
|
|
Circular Locus Pilling Test machine |
Testing Standards:GB/T 4802.1, JIG 040-1990
Product Information:
The Circular Locus Pilling Tester is used for determining the pilling and fuzzin... |
All supplier products
Same products
