Photovoltaic 1000 DC Power SPD
PhotovoltaicSPDfor DC power, 1000VDC; In(8/20us): 20kA/phase, Imax: 40kA/phase; hot-pluggable; fault indication;
Features & Advantages of Photovoltaic SPD 1000VDC
Status indication:
Green: OK
Red: Failed
DC power surge protector modules can be replaced online.
Remote alarm output is optional, named with "F".
It is normally installed at the boundary of LPZ1 and LPZ2 or subsequent LPZs.
Parameter of Photovoltaic 1000VDCSPD
T2-1000 |
|
T2-1000F |
|
1000VDC |
|
Short-circuit current rating Iscpv |
1000A |
Nominal discharge current In(8/20µs) |
20kA |
40kA |
|
Voltage protection level Up |
4kV |
Recommended backup fuse |
80A gG |
Recommended grounding cable |
6~35mm2 |
Response time |
25ns |
Residual current IPE |
<10μA |
Remote alarm output |
250VAC/0.5A;24VDC/0.5A |
Housing protection grade(IEC60529) |
IP 20 |
Housing material/inflammability rating(UL94) |
PA66/V0 |
Testing standard |
IEC 61643-31 |
CHENZHUstrives to provide high-quality products and services to meet the expectations of our customers and interested parties by delivering outstanding performance. We have special talents to research and develop safety and automation system. Indeed, automation and safety are our interface products' main characters.
Send product request
Other supplier products
Antennas And Feeders SPD | Antennas And Feeders SPD Antennas feeders SPD, the coax lightning protectoror coax surge suppressor, is used in the antenna feeder circuit of the ... | |
CZ2000 Series Signal Conditioner | CZ2000 range signal conditioners use high-efficiency electromagnetic isolation technology to achieve reliable galvanic isolation among power supply... | |
Temperature Transmitter | SHANGHAI CHENZHU INSTRUMENT CO., LTD. is a very established provider that specialises in automation and safety. We have over 24 years of experience... | |
Safety Relay | Automation automation direct safety relays are mainly applied to the safety control circuit, connecting the safety sensing elements and mechanical ... | |
CZ3000 Temperature Converter Signal Conditioner | Thermal resistance type isolator, the two-wire or three-wire system resistance signal is converted into 0/4~20mA current signal isolation or 0/1~5V... |