Ventilation Therapy Mask
Face Mask Ventilation
Elaborate Design
Ultra Quiet
Good Fit
Super Safe
Specification of Ventilator Oxygen Mask
Size/Model |
H(mm) |
W(mm) |
L(mm) |
Large |
115 |
91 |
120 |
Medium |
115 |
90 |
|
Small |
115 |
89 |
118 |
Daily Cleaning |
The headgear needs to be removed when cleaning the mask daily. |
||
Wash the mask in warm soap water. Please air dry it after wash. |
|||
Weekly Cleaning |
Soak the headgear in warm soap water for 10 minutes and then handwash. Please air dry it and avoid direct sunlight. |
Details of Ventilation Therapy Mask
Quick Details of Ventilation Therapy Mask
Elaborate Design
Good seal
Wide vision
Minimal contact
Ultra Quiet
Low noise
360°exhaust0
Cellular vented holes
Good Fit
Maximum compatibility
Soft silicone cushion
Comfortable for
long-time use
Super Safe
Bioc test passed
Medical-grade silicone
Suitable for sensitive skin
Fitting Guide
Put the upper ends of the headgear into the fitting holes and attach them well.
Place the mask on the face and extend the headgear to the back of the head. Please confirm that the headgear is fully fitted.
Put the lower- half straps beneath the ear and insert the clips into the hook on the lower part of the mask frame.
Extend the upper-halt straps of the headgear as shown in the above figure until the mask is fixed properly.
Repeat the process for the lower-half of the headgear as shown in the above figure until the task is fixed properly.
Connect the air tubing to the swivel. Then turn on the device and adjust the mask to the right position and make sure no air leak.
Product Life
The expected service life of the FM50 Full Face Mask is 6 months.
if the mask is broken or deteriorated during use, please replace it with a new one.
As one of oxygen masks suppliers, we can provide kinds of ventilation mask for sale, and the ventilation mask priceis reasonable, if you want to buy different ventilation mask types, please contact us.
Now the price of capnography monitor for saleis affordable, anything you need, please leave us a message.
Send product request
Other supplier products
Sidestream Capnography Sensor | Mainstream Sidestream CapnographySensor Complete model: Compatible with equipment from many well-known manufacturers around the world, with wide c... | |
Heated Breathing Circuit | Rapid heating and precise constant temperature; Precise structure, stable connection and good air tightness; Good compatibility, plug and play; ... | |
SpO2 Sensor | SpO2 Sensor The spo2 sensor cableis a crucial medical device used to measure the oxygen saturation level in a patient’s blood. It’s no... | |
Sidestream EtCO2 Sensors | Sidestream EtCO2 sensors are used to measure the carbon dioxide (CO2) levels in a patient's breath during anesthesia or ventilation procedures. The... | |
Sampling Line | Medical tubing that connects a patient to monitoring devices. In anesthesia, it collects exhaled gases for analysis, providing crucial data on gas ... |
Same products
Ventilation Therapy Mask | Seller: Qinhuangdao Kapunuomaite Medical Equipment S&T Co.,Ltd. | Face Mask Ventilation Elaborate Design Ultra Quiet Good Fit Super Safe Specification... | |
Sidestream EtCO2 Sensors | Seller: Qinhuangdao Kapunuomaite Medical Equipment S&T Co.,Ltd. | Sidestream EtCO2 sensors are used to measure the carbon dioxide (CO2) levels in a patient's breat... | |
GE IS210DTURH1A(IS200DTURH1A) | Seller: Collet Automation Equipment Co., Ltd | Contact: May Phone No: | |
GE IS420ESWBH3AE | Seller: Collet Automation Equipment Co., Ltd | Contact: May Phone No: | |
GE IS415UCCCH4A | Seller: Collet Automation Equipment Co., Ltd | Contact: May Phone No: |