Path Lights
Need a light to shine your way home?
Our solid brass shall provide you with adequate illumination to enjoy a relaxing walk back to your place. Various hats to make your garden distinguishing from your neighbourhood. Nothing can bring back the touch of vintage more than antique bronze and black gun metal finish.
Solid brass path lightsFeatures
Made of Die-cast Brass
Various Stylish Hats
Available with Antique Bronze or Gun Metal Finish
72-inch 18 Awg Lead Wire
How To Install brass landscape path lightsOutside
01
Finding the Ideal Locations for the Path Lights
Consult a landscape designer or you can decide the layout of the path lights by yourself, but do not forget to make a plan before you start digging holes. Illumination and heights of each path light are the keys. For safety concerns, please make sure the lights are away from the swimming pool or other watering sources.
How To Install Path Lights Outside
02
Assemble the Brass Path Lights
Lose the lens from the stem by unscrewing it and drop the proper bulb into the fixed socket. Install the hat to the stem. Connect the stake to the stem.
How To Install Path Lights Outside
03
Dig Holes and Trenches
A spade-shape shovel is recommended for digging holes for ground spikes and trenches for wire. Do not put wires beside where you are going to dig trenches in case of cutting the wire. After setting up the spikes and wire, backfill the dirt and make sure the ground is sturdy enough.
How To Install Path Lights Outside
04
Wiring
Remove the pre-stripped sleeves from the wire, and use waterproof wire connectors to accommodate the twisted wires.
How to Set Up the Lay out?
It is up to the area you want to light up, a zig-zag layout of the path lights will illuminate the path evenly to avoid over accented or underlit parts. You also will need to check the width of the path to ensure you use the right G4/bin pin bulb to provide efficient illumination.
Brass up lightsalso available.
Send product request
Other supplier products
 |
Standard LED MR8 | LT TECH MR8 LED is our smallest spotlight for the compact fixture LT2104, it is available in 2.5w, 38° and 60° beam spead, can be used for ... |
 |
LT1016C 8W High Power MR16 | LT1016C 8W High Power MR16 LT TECH 8w MR16are designed with a high lumen output of 850lm for the low voltage landscape lighting, the beam angles a... |
|
|
Path Lights | Need a light to shine your way home? Our solid brass shall provide you with adequate illumination to enjoy a relaxing walk back to your place. V... |
 |
LT2406 Hollowed-out G4 Path Lights | Stylish hat of LT2406 Hollowed-out G4 outside lights for walkwaycan give out emanative illumination when you choose the right G4 bulbs for it, it w... |
 |
LT104A3 2W Ceramic G4 | LT104A3 2W Ceramic G4 LT TECH LED 2W ceramic G4 Bi-pin bulbs are designed to fit all Pathlights, Deck lights, and some flood lights. All of the... |
Same products
 |
CCT Flexible Led Strip | Seller: Shenzhen Blue Diamond Technology Co.,Ltd | CCT Flexible Led Strip CCTFlexible LED Stripuses a 10mm wide flexible PCB with an operating volt... |
 |
Neon Flex LED Strips 10X18mm | Seller: Shenzhen Blue Diamond Technology Co.,Ltd | Neon Flex LED Strips 10X18mm Silicone neon flex LED Stripsmainly apply to courtyard, building, b... |
 |
Vertical Bendable Neon Flex LED Strips 15X16mm | Seller: Shenzhen Blue Diamond Technology Co.,Ltd | Vertical Bendable Neon Flex LED Strips 15X16mm This Vertical Bendable Neon Flex LED Strips are v... |
 |
Vertical Bendable Neon Flex LED Strips 15X16mm | Seller: Shenzhen Blue Diamond Technology Co.,Ltd | Vertical Bendable Neon Flex LED Strips 15X16mm This Vertical Bendable Neon Flex LED Strips are v... |
 |
COB LED Tape 24V 3W/ft 16ft 10mm IP65 | Seller: Shenzhen Blue Diamond Technology Co.,Ltd | COB LED Tape 24V 3W/ft 16ft 10mm IP65 Product Features Waterproof IP65 RatingThis COB LED Tapei... |
