5 Gallon PET bottle blow molding machine
Using PET material, KINTL-5G could blow extra-large bottles of 5 gallon volume. Our KINTL-5G is designed to produce high quality water drums at very competitive prices. It uses very high quality electrical and pneumatic parts imported from Germany and Japan to ensure stable and effective work. The complete production line for making 5 Gallon PET bottle manufactured by our factory includes: 1.)Main blow molding machine 1 unit 2.)Preform Preheater 1 unit 3.)Voltage stabilizer ( 50KW) 1 set 4.)Chilling type air dryer(with built in rear/front filter) 1 set 5.)Low pressure air compressor 12.5Kg/0.8M3 1 set 6.)High pressure air compressor 30Kg/0.7M3 1 set 7.)Blow mould for 5 Gallon bottle 1 cavity 1 unit Product Feature: MAIN BLOWING MACHINE SIEMENS PLC controller. FESTO hydraulic elements, valves and pipes. MISHUBICH VVVF motor. The mould clamping system design is adopted by the advanced toggled lock design producing strong clamping force. The mould thickness can be adjusted by gear-turned belt automatically. On the blowing base of machine, an automatic moving device is assembled. PREHEATER The preheater is an infrared heater. When the preforms being heated in the infrared heater by circulation movement, they can also be rotating independently. Inside the preheater, there are 22 holding heads for the preforms and 12 infrared pipes providing 12 zones of different heating temperature. It ensures accurate temperature at each zone pipe without fluetuation, guarantee high percentage of perfect end products POWER CONSUMPTION: TOTAL POWER OF THE WHOLE SYSTEM IN KW. 22.5kw TOTAL POWER CONSUMED BY PET BLOWING MACHINE IN KW. 3 POWER CONSUMED BY THE PREHEATER IN KW. 7.2kw/220v TOTAL POWER CONSUMED BY THE TWO AIR COMPRESSORS (HIGH PRESSURE AND LOW PRESSURE). 7.5kwx2 PRODUCTION CAPACITY 400BPH FOR 5L BOTTLE 90BPH FOR 5 GALLON BOTTLE
Send product request
Other supplier products
 |
preform for 5 and 3 gallon PET bottle | Very high quality preform for 3 and 5 gallon bottles： from 350g to 800g, very high transparency, very high yield rate, prompt delivery |
 |
automatic PET bottle blow molding machine | CM-A4 Full automatic blow molding machine is suitable for producing PET plastic containers and bottles in all shapes. It is widely used to produce ... |
|
|
5 Gallon PET bottle blow molding machine | Using PET material, KINTL-5G could blow extra-large bottles of 5 gallon volume. Our KINTL-5G is designed to produce high quality water drums at ver... |
 |
bottle blowing machine, semi-automatic | CM-9A Stretch blow-molding machine is an economical machine for blowing various PET bottles of max. Volume up to 5L. This set of machines uses rota... |
Same products
 |
Button sewing machine JM-373 | Seller: Zhejiang Huaqi Information Technology Co., LTD | FeaturesIt is mainly used for sewing flat buttons with two holes or four holes. If attached, it c... |
 |
YZH Fixed Rockbreaker Boom System | Seller: Shandong Yirun Foundation Engineering Co., Ltd | For fixed applications, we offer high class powering modules. Such unit is equipped with an elect... |
 |
铸造锡基轴承合金 | Seller: 河南桦创金属材料贸易有限公司 | 铸造锡基轴承合金 铸造轴承合金分为锡基、铅基轴承合金。虽然选用于滑动轴承轴瓦（轴套）的轴承材料有粉末冶金、非金属材料和金属材料等，但工业中常选用的还是非铁金属的铸造轴承合金，习惯称为铸造轴承合金... |
 |
Fixed Rockbreaker Boom | Seller: Shandong Yirun Foundation Engineering Co., Ltd | Why buy the Fixed Rockbreaker Boom from Shandong YuanZhenghang Machinery Equipment Co., LTD.? 1.... |
 |
Sinodrills T38 T45 T51 rock drill button bits | Seller: 844239 | SINODRILLS Threaded Button Bits With the top quality of alloy steels imported from USA and the b... |
